Conformal Pad-Printing Electrically Conductive Composites onto Thermoplastic Hemispheres: Toward Sustainable Fabrication of 3-Cents Volumetric Electrically Small Antennas
نویسندگان
چکیده
Electrically small antennas (ESAs) are becoming one of the key components in the compact wireless devices for telecommunications, defence, and aerospace systems, especially for the spherical one whose geometric layout is more closely approaching Chu's limit, thus yielding significant bandwidth improvements relative to the linear and planar counterparts. Yet broad applications of the volumetric ESAs are still hindered since the low cost fabrication has remained a tremendous challenge. Here we report a state-of-the-art technology to transfer electrically conductive composites (ECCs) from a planar mould to a volumetric thermoplastic substrate by using pad-printing technology without pattern distortion, benefit from the excellent properties of the ECCs as well as the printing-calibration method that we developed. The antenna samples prepared in this way meet the stringent requirement of an ESA (ka is as low as 0.32 and the antenna efficiency is as high as 57%), suggesting that volumetric electronic components i.e. the antennas can be produced in such a simple, green, and cost-effective way. This work can be of interest for the development of studies on green and high performance wireless communication devices.
منابع مشابه
Conformal printing of electrically small antennas on three-dimensional surfaces.
Increasingly stringent design constraints imposed by compact wireless devices for telecommunications, defense, and aerospace systems require the miniaturization of antennas. Unlike most electronic components, which benefi t from decreased size, antennas suffer limitations in gain, effi ciency, system range, and bandwidth when their size is reduced below a quarter-wavelength. The electrical size...
متن کاملTowards Practical Application of Paper based Printed Circuits: Capillarity Effectively Enhances Conductivity of the Thermoplastic Electrically Conductive Adhesives
Direct printing nanoparticle-based conductive inks onto paper substrates has encountered difficulties e.g. the nanoparticles are prone to penetrate into the pores of the paper and become partially segmented, and the necessary low-temperature-sintering process is harmful to the dimension-stability of paper. Here we prototyped the paper-based circuit substrate in combination with printed thermopl...
متن کاملRational Design of a Printable, Highly Conductive Siliconebased Electrically Conductive Adhesive for Stretchable RadioFrequency Antennas
© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim 464 wileyonlinelibrary.com fl exible nature, impossible within the confi nes of rigid and planar substrates. Stretchable RF electronics not only enable applications in which circuits can be wrapped conformally around complex curvilinear shapes or biological tissues, such as in body-worn wireless sensor nodes, [ 1,2 ] and wearable radio frequency...
متن کاملSupporting Information UV-Crosslinkable Graphene/ poly (trimethylene carbonate) Composites for 3D Printing of Electrically Conductive Scaffolds
متن کامل
Planar and Three-Dimensional Printing of Conductive Inks
Printed electronics rely on low-cost, large-area fabrication routes to create flexible or multidimensional electronic, optoelectronic, and biomedical devices. In this paper, we focus on one- (1D), two- (2D), and three-dimensional (3D) printing of conductive metallic inks in the form of flexible, stretchable, and spanning microelectrodes. Direct-write assembly is a 1-to-3D printing technique tha...
متن کامل