Active Acoustic Noise Control in Ducts
نویسندگان
چکیده
In this paper existing classical and advanced techniques of active acoustic noise cancellation (ANC) in ducts are collected and compared. The laboratory plant used in experience showed a linear behaviour and so the advanced techniques were not used. Due to delay on the plant, the feedback classical techniques could not be applied. The best results were obtained with the modified filtered-reference LMS (MFX-LMS) and filtered-u techniques. A very important conclusion is that the quadratic normalisation is needed to maintain the algorithms always stable. In this paper 18dB of attenuation of white noise and 35 dB of attenuation of tonal noise were achieved. Thus, ANC can be applied in a real situation resulting in important noise attenuations.
منابع مشابه
Active Noise Control in Pardis Coach using Different Fuzzy Controllers
In recent years, need to increase the convenience of trips in railway vehicles causes that train operators and manufacturers focus on reducing the noise level which is sensed by passengers. In this paper, first the state of modeling acoustic noise in cab train is discussed and natural frequencies and acoustic mode shapes are derived and then formulation of acoustic pressure in the cab will be o...
متن کاملAdaptive active control of free space acoustic noise
This paper concerns adaptive active control of acoustic noise in free space. Conventional adaptive active noise control algorithms are efficient in acoustic ducts or headphones; however, they are very sensitive when being used in free space. An efficient adaptive active noise control algorithm for free space noise is developed based on analyzing noise field in a volumetric zone around the error...
متن کاملCompact and Efficient Active Vibro-acoustic Control of a Smart Plate Structure
An effective wide band active control law through one kind of the Dynamic Vibration Absorber (DVA) is proposed and studied in this paper. With the help of mechanical impedance method, active DVA control law is formulated based on the passive mechanical model. The electrical DVA can generate multi-mode active damping to the structure. The host structure is an aluminum plate and acceleration sign...
متن کاملActive Noise Control in Ducts Using Genetic Algorithms
This paper addresses the problem of actively control acoustic noise in ducts through the application of genetic algorithm and genetic programming (termed GENETIC CONTROL). Genetic programming is applied to structure a control strategy and genetic algorithm to adapt the resulting model parameters in real time. For application in real time situations, a gain/delay model was finally coded in the c...
متن کاملConstraint filtered-x and filtered-u least-mean-square algorithms for the active control of noise in ducts
In the active control of noise in ducts, it is common practice to locate an error microphone far from the control source to avoid the near-field effects by evanescent waves. Such a distance between the control source and the error microphone makes a certain level of time delay inevitable and, hence, may yield undesirable ffects on the convergence properties of control algorithms such as filtere...
متن کامل