Design of Low Power Sequential Circuit by using Adiabatic Techniques
نویسنده
چکیده
Various adiabatic logic circuits can be used for minimizing the power dissipation. To enhance the functionality and performance of circuit two adiabatic logic families PFAL and ECRL have been used and compared with CMOS logic circuit design. In this paper, A MASTER-SLAVE D flip-flop is proposed by the use of SPICE simulation on 90nm technology files. The simulation result shows that PFAL is a better energy saving techniques then ECRL logic circuit.
منابع مشابه
Design of power-efficient adiabatic charging circuit in 0.18μm CMOS technology
In energy supply applications for low-power sensors, there are cases where energy should be transmitted from a low-power battery to an output stage load capacitor. This paper presents an adiabatic charging circuit with a parallel switches approach that connects to a low-power battery and charges the load capacitor using a buck converter which operates in continuous conduction mode (CCM). A gate...
متن کاملDesign of Sequential Circuit using Low Power Adiabatic Complementary Pass Transistor Logic
Adiabatic logic style is Proving to be an attractive solution for low power digital design. The paper investigates low – power characteristics of complementary pass -transistor logic (CPL) circuits using AC power supply. The two-phase power-clock scheme is more suitable for the design of flip-flops and sequential circuits because it uses fewer transistors. The Adiabatic flip-flop have large ene...
متن کاملLow Power Combinational and Sequential Circuits with Adiabatic Complementary Pass-Transistor Logic (ACPL)
This paper presents low-power characteristics of adiabatic complementary pass-transistor logic (ACPL) using four-phase AC power supply. Adiabatic CPL circuits consist of pure NMOS transistors, use CPL blocks for evaluation and bootstrapped NMOS switches to eliminate non-adiabatic loss of output loads. In this paper, combinational circuit (4-bit ripple carry adder) and sequential circuit (4-bit ...
متن کاملStudy and Analysis of Two Partially Adiabatic Inverters (PADI)
The dynamic power requirement of CMOS circuits is rapidly becoming a major concern in the design of personal information systems and large computers. Battery operated portable computers and wireless communication products have often been used. Thus low power integrated circuit design has been strongly demanded for implementation. One of the promising techniques of low power design is adiabatic ...
متن کاملLow-Energy Logic Circuit Techniques for Multiple-Valued Logic
Multiple valued logic (MVL) has been proposed as a means for reducing the power, improving the speed, and increasing the packing density of VLSI circuits. These performance improvements are achieved by designers who identify signal processing functions that can benefit from the design tradeoffs possible with MVL. Since advocates of MVL are accustomed to incorporating the possible tradeoffs of M...
متن کامل