Effects of Magnetic Nanoparticles and External Magnetostatic Field on the Bulk Heterojunction Polymer Solar Cells
نویسندگان
چکیده
The price of energy to separate tightly bound electron-hole pair (or charge-transfer state) and extract freely movable charges from low-mobility materials represents fundamental losses for many low-cost photovoltaic devices. In bulk heterojunction (BHJ) polymer solar cells (PSCs), approximately 50% of the total efficiency lost among all energy loss pathways is due to the photogenerated charge carrier recombination within PSCs and low charge carrier mobility of disordered organic materials. To address these issues, we introduce magnetic nanoparticles (MNPs) and orientate these MNPS within BHJ composite by an external magnetostatic field. Over 50% enhanced efficiency was observed from BHJ PSCs incorporated with MNPs and an external magnetostatic field alignment when compared to the control BHJ PSCs. The optimization of BHJ thin film morphology, suppression of charge carrier recombination, and enhancement in charge carrier collection result in a greatly increased short-circuit current density and fill factor, as a result, enhanced power conversion efficiency.
منابع مشابه
Improvement of light harvesting by inserting an optical spacer (ZnO) in polymer bulk heterojunction solar cells: A theoretical and experimental study
By introducing a thin ZnO layer as an optical spacer, we have demonstrated that inserting this layer between an active layer and a reflective electrode results in a re-distribution of the optical electric field inside bulk heterojunction solar cells. A theoretical analysis by optical modeling showed that the thin ZnO layer could shift the position of the maximum of the electric field into the a...
متن کاملمطالعه رسانایی جریان مستقیم لایههای نازک P3HT آلاییده با نانو ذرات ZnS و Ag
Interest in the P3HT: ZnS nanocomposites are increased due to their applicability as an active layer for bulk heterojunction solar cells of high open circuit voltage and charge transport in this type of solar cells determines their performance. So the study of the conduction mechanism of the P3HT:ZnS nanocomposites is significant to improve the efficiency of such solar cells, and this paper dis...
متن کاملFabrication of High-Performance Polymer Bulk-Heterojunction Solar Cells by Interfacial Modifications II
This work studies the magneto conductance (MC) responses of regioregular poly(3-hexylthiophene) (P3HT)-based polymer photovoltaic devices. The net MC results of devices are the sum of the positive and negative MC effects. The positive MC effect is due to the increased population of the singlet polaron-pair (PP) states (of the high dissociation rate to charge carriers) under the magnetic field. ...
متن کاملHigh Efficiencies in Nanoscale Poly(3-Hexylthiophene)/Fullerene Solar Cells
A modified morphology was introduced for poly(3-hexylthiophene):phenyl-C71-butyric acid methyl ester (P3HT:PC71BM) bulk heterojunction (BHJ) solar cells by thermal and solvent annealing treatments in the presence of hydrophilic-hydrophobic block copolymers. Power conversion efficiency (PCE) plummet was prohibited during both thermal and solvent treatments for all BHJ devices modified wit...
متن کاملOptimizing ZnO nanoparticle surface for bulk heterojunction hybrid solar cells
The performance of hybrid solar cells composed of polymer and ZnO is mainly hindered by the defects of ZnO. Here, we investigate the effects of ZnO nanoparticle surface modification with poly(ethylene oxide) (PEO) on the performance of bulk heterojunction hybrid solar cells based on poly[2-methoxy-5-(2′-ethyl-hexyloxy)-1,4-phenylene vinylene] (MEH-PPV) and ZnO nanoparticles. The reference devic...
متن کامل