Thermal Properties and Three-Phase Structure of cis-1,4-Polybutadiene
نویسنده
چکیده
The thermal properties of cis-1,4-polybutadiene (cis-PBD) were investigated in dependence of content of cis units and of linearity of the main chain. cis-PBD grades containing a fraction of cis-segments ranging from 93 to 98 %, and with linear or branched chains, were analyzed. Upon isothermal crystallization from the melt at -26 °C for 1 h, followed by cooling to below the glass transition temperature, cis-PBD develops a three-phase structure, where the mobile amorphous phase is equal to 0.41, independently of chain structure, crystallinity ranges from 0.23 to 0.28, and the rigid amorphous fraction varies from 0.31 to 0.35. Up to three main endotherms can be evidenced by calorimetry at slow heating rate, depending on chain regularity. The multiple melting behavior was discussed on the basis of the three-phase structure, as well as of crystallization kinetics.
منابع مشابه
Isotactic and Syndiotactic Alternating Ethylene/Propylene Copolymers Obtained Through Non-Catalytic Hydrogenation of Highly Stereoregular cis-1,4 Poly(1,3-diene)s.
The homogeneous non-catalytic hydrogenation of cis-1,4 poly(isoprene), isotactic cis-1,4 poly(1,3-pentadiene) and syndiotactic cis-1,4 poly(1,3-pentadiene) with diimide, formed by thermal decomposition of para-toluenesulfonylhydrazide, is examined. Perfectly alternating ethylene/propylene copolymers having different tacticity (i.e., isotactic and syndiotactic), which are difficult to synthesize...
متن کاملKinetic study of cis-polybutadiene epoxidation by using 1HNMR spectroscopy in buffered oxone® solution with tetra-n-butyl ammonium bromide as phase transfer catalyst (PTC)
Cis-polybutadiene was functionalized using in–situ generated DMD as oxidant and tetra-n-butyl ammonium bromide as phase transfer catalyst (PTC). The epoxidation process was investigated by 1HNMR spectroscopy. 1HNMR spectrum analysis of products confirms the absence of ring opening side products in epoxidation reaction. Various factors such as reaction temperature, reaction time and the concentr...
متن کاملCatalytic Cyclopropanation of Polybutadienes
Catalytic cyclopropanation of commercial 1,2or 1,4cis-polybutadiene, respectively, with ethyl diazoacetate catalyzed by [TpCu(NCMe)] (Tp 1⁄4 hydrotris(3,4,5-tribromo-1-pyrazolyl)borate) at room temperature afforded high molecular weight (Mn > 10 5 mol ) side-chain or main-chain, respectively, carboxyethyl cyclopropyl-substituted polymers with variable and controlled degrees of functionalization...
متن کاملRecent advances in the polymerization of butadiene over the last decade
The stereospecific polymerization of conjugated dienes began in 1954 with the first catalysts obtained by combining TiCl4 or TiCl3 with aluminum-alkyls, i.e. the catalytic systems previously employed for ethylene and propylene polymerizations. Subsequently, many other catalytic systems were obtained and examined by a combination of transition metal or lanthanide compounds with appropriate alkyl...
متن کاملStructure and Properties of Model Polybutadienes and HIPS: Effect of Rubber Microstructure on HIPS Dynamic Mechanical Properties
High impact polystyrene (HIPS) series was synthesized by the mass-suspension process using polybutadiene (PB) rubbers with different cis-1,4, trans-1,4, and vinyl-1,2 isomers content. The HIPS were characterized by TEM, GPC, DMA, and DSC analyses. It was found that the dynamic mechanical properties of HIPS strongly depend upon the microstructure of PB used as a modifier due to the different ten...
متن کامل