Effect of Runner Dimensions on Cavity Filling in Micro- Injection Moulding for Defect-free Parts
نویسندگان
چکیده
Modelling and simulation of injection moulding process is an important technique that could shorten production cycle time with improved productivity for defect-free parts. This technique is more suitable for micro-injection moulding (μIM) process as likely defects during production can be predicted. Therefore, this study aims to investigate the effect of runner dimensions on quality of moulded parts. Solidworks plastic simulation software was used for mould cavity filling analysis of ASTM D638-10 Type V. The dimensions of the runner and the injection point investigated are 0.5 mm, 0.8 mm, 1 mm and 2 mm. The moulded part quality characteristics predicted are filling time, sink mark and air trap. In addition, analytical model for prediction of melt pressure as a function of both melt filled distance (xo) and the temperature is developed. The theoretical model and simulation software are useful for investigations of defect-free parts in μIM process.
منابع مشابه
Numerical simulation analysis of the in-cavity residual stress distribution of lignocellulosic (wood) polymer composites used in shallow thin-walled parts
In this paper, a numerical analysis of in-cavity residual stress formation in the thin-walled parts of injection-moulded parts is presented by considering the residual stresses produced during the post-filling stage. Injection moulding of shallow thin-walled parts with a thickness of 0.7 mm was performed using lignocellulosic polymer composites (PP + 50 wt% wood), and the parts have been system...
متن کاملMultivariate regression modeling for monitoring quality of injection moulding components using cavity sensor technology: Application to the manufacturing of pharmaceutical device components
There is an increased demand within the moulding industry to improve the quality of moulded parts by maintaining consistent tolerances and overall dimensions. This interest is more important in areas of the moulding industry that are dedicated to pharmaceutical devices, where a quality by design approach is now expected to be adopted. A pharmaceutical device is an assembly of different plastic ...
متن کاملExperimental and Numerical Investigation of Thickness on the Shrinkage and out of Roundness in Cylindrical Parts in Injection Molding Process
Injection molding process is one of the most important methods of forming in the plastics manufacturing industry. Shrinkage and out of roundness are phenomenons that affect the final product quality. In this study, the effect of the thickness of cylindrical parts from polypropylene material on shrinkage and out of roundness has been investigated. For this purpose, injection molding process is s...
متن کاملEffects of Mold Surface Roughness on Compressible Flow of Micro-Injection Molding
be obtained as [5] Thus, the vol a surface roughness is δ=3S . ume fraction can he effective roughness height (δ) in terms of the average T to represent the physical surface roughness of the homogeneous pyramid roughness profile he equivalent three surface roughness. T -dimensional as the parameter to characterize the surface profilometer, , which can be measured easily using 3D a average...
متن کاملInjection Moulding Tool Design Manufacturing, Estimation and Comparison of L&T Power Box Side Panel Using Plastic Materials HDPE, ABS, PP and PC
Power box is a component which is used in earth movers. It controls the power circuit. It has top cover, front cover, back cover and side panel. The aim of the paper is to create the L&T power box side panel by using parametric pro/E wild fire 5.0. The part modeling, Core-cavity design, CNC manufacturing programming and Mould flow analysis i.e simulation to avoid potential mould-filling problem...
متن کامل