Direct chemical synthesis of L1(0)-FePtAu nanoparticles with high coercivity.

نویسندگان

  • Yongsheng Yu
  • P Mukherjee
  • Yuan Tian
  • X-Z Li
  • J E Shield
  • D J Sellmyer
چکیده

We report a facile synthesis of hard magnetic L10-FePtAu nanoparticles by coreduction of Fe(acac)3, Pt(acac)2 (acac = acetylacetonate) and gold acetate in oleylamine. In the current reaction condition, NP sizes are controlled to be 5.5 to 11.0 nm by changing the amount of Au doping. When the Au composition in the NPs is higher than 14%, the hard magnetic NPs are directly obtained without any annealing. The highest coercivity of 12.15 kOe at room temperature could be achieved for the NPs with 32% Au doping, which is much higher than the coercivities reported by the previous studies on solution-synthesized FePt nanoparticles. The reported one-pot synthesis of L10-FePtAu NPs may help to build superstrong magnets for magnetic or data-storage applications.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Synthesis of Co(x)Pt(1-x) alloy nanoparticles of different phase by micellar technique and their properties study.

Among many ferromagnetic materials, CoPt alloy nanoparticles with high coercivity and small grain size are one of the potential candidates having its application in high-density storage media manufacturing. CoPt alloy nanoparticles of different compositions have been prepared in TX-100 micellar medium and capped with sodium oleate to prevent the agglomeration during annealing at high temperatur...

متن کامل

Chemical synthesis of low-coercivity, silica/Co composites for high-frequency magnetic components

The paper reports correlation between processing, structural and magnetic properties of cobalt nanoparticles dispersed in an insulating oxide matrix. High-temperature, chemical decomposition approach was utilized to achieve highly-dispersed, ultra-fine cobalt nanoparticles in silica matrix. Synthesis parameters such as precursor to passivating agent ratio were designed to control the metal-to-o...

متن کامل

Magnetic properties of Fe(x)Pt(y)Au(100-x-y) nanoparticles.

Fe(x)Pt(y)Au(100-x-y) nanoparticles of size 3.5 nm were prepared by polyol reduction of platinum acetylacetonate and gold acetate and the thermal decomposition of iron pentacarbonyl. The as-synthesized nanoparticles with disordered fcc structure were then heat treated to transform to the L1(0) structure with high magnetocrystalline anisotropy. By tuning the stoichiometry of the Fe(x)Pt(y)Au(100...

متن کامل

Sinter-free phase conversion and scanning transmission electron microscopy of FePt nanoparticle monolayers.

Thermally robust monolayers of 4-6 nm diameter FePt nanoparticles (NPs) were fabricated by combining chemical synthesis and atomic layer deposition. Spin-cast monolayers of FePt NPs were coated with thin, 11 nm-thick layers of amorphous Al(2)O(3), followed by annealing to convert the FePt NPs from an alloy (A1) into intermetallic FePt (L1(0)) and FePt(3) (L1(2)) phases. The Al(2)O(3) layer serv...

متن کامل

One-step synthesis of FePt nanoparticles with tunable size.

A one-step synthesis of FePt nanoparticles is reported. The size, composition, and shape of the particles are controlled by varying the synthetic parameters such as molar ratio of stabilizers to metal precursor, addition sequence of the stabilizers and metal precursors, heating rate, heating temperature, and heating duration. An assembly of large (6 nm or greater) FePt nanoparticles, especially...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Nanoscale

دوره 6 20  شماره 

صفحات  -

تاریخ انتشار 2014