Theoretical Studies on Copper Extraction by means of Polymeric Membrane Contactors
نویسنده
چکیده
Solvent extraction of copper in hollow-fiber membrane contactors was investigated in this study. Extraction of copper is carried out conventionally using mixer-settlers. These contactors have some disadvantages such as consumption of high energy, dispersion of two phases and high operating costs. Membrane contactors can obviate the need for conventional contactors. The most favorable module used as membrane contactor is hollow-fiber module. These modules provide high surface area per contact volume. A known interface can be established between aqueous and organic phases for the purpose of mass transfer and extraction. Equilibrium is established at the aqueous-organic interface and depends on the hydrophobicity or hydrophilicity of the membrane. Investigations on copper extraction revealed that these contactors can be used as a new device for extraction of copper. Some authors have studied extraction of Cu2+ with a kerosene solution of di(2-ethylhexyl) phosphoric acid (D2EHPA) using hollow-fiber membrane contactors.
منابع مشابه
Separation of Carboxylic Acids from Aqueous Solutions using Hollow Fiber Membrane Contactors
Separation of formic, acetic, and propionic acids from the aqueous stream using membrane solvent extraction has been studied using three different membrane contactors made of polysulfone (PS), polyethersulfone (PES), and polyvinylidene fluoride (PVDF) using two different solvents; including ethyl acetate (EA) and diisopropyl ether (DIPE). The efciency of the membrane and e...
متن کاملCopper recovery from ammoniacal media using hollow fibre contactors
This work aims to study the recovery of copper from ammoniacal aqueous solutions using hydrophobic propylene membrane contactors. The hydroxyoxime LIX 84-I and the β-diketone LIX 54 (both from Cognis) were used as extractants. The results obtained showed that practically all the copper content was removed from the ammoniacal feed solutions. The recovery of copper reached nearly 100% in several ...
متن کاملAn applied comparison between conventional pre-dispersed solvent extraction (PDSE) contactors and new dissolved nitrogen PDSE (DNPDSE) ones
Efforts to increase the mass transfer coefficient, enhance the contact area, and decrease the power input of contractors have given risen to the development of the pre-dispersed solvent extraction (PDSE) contactor and the devise of the new dissolved nitrogen PDSE (DNPDSE) contactors. The studies conducted after the design of the new contactor to determine the working conditions for its suitable...
متن کاملAcetone and Ethanol Extraction from Water by Means of Membrane: Modeling and Numerical Simulation
This study presents mass transfer modeling of solvent extraction by membrane contactors. The extraction system was a membrane contactor, an aqueous solution of ethanol and acetone as the feed and a near-critical phase of carbon dioxide as the solvent. Model was based on solving conservation equations for solutes in the membrane contactor. The equations of the model were solved by numerical meth...
متن کاملTheoretical Performance Evaluation of Inorganic (Non Pd-Based) Membranes for Hydrogen Separation
The aim of this work theoretical study is to theoretically investigate a inorganic membrane assisted purifcation process of an H2-rich stream derived from a conventional methanol steam reforming stage. In particular, a black-box model for multicomponent gas mixture purifcation is dev...
متن کامل