UV polymerization of hydrodynamically shaped fibers.
نویسندگان
چکیده
Most natural and man-made fibers have circular cross-sections; thus the properties of materials composed of non-circular fibers are largely unexplored. We demonstrate the technology for fabricating fibers with predetermined cross-sectional shape. Passive hydrodynamic focusing and UV polymerization of a shaped acrylate stream produced metre-long fibers for structural and mechanical characterization.
منابع مشابه
Electronic Supporting Information UV Polymerization of Hydrodynamically Shaped Fibers
The UV polymerization process dictates the materials that can be employed in the sheath-flow device downstream from the hydrodynamic focusing grooves. The primary requirement for UV polymerization is an integrated window through which the shaped core can be polymerized using a UV source. Possible options include the use of all PDMS parts, top and bottom, or a combination of PDMS and silicon/gla...
متن کاملSurface-initiated Atom Transfer Radical Polymerization and Solution Intercalation Methods for Preparation of Cellulose-G-PS-G-PAN/MMT Bionanocomposite
Cellulose was modified by polystyrene (PS) and polyacrylonitrile (PAN) via free radical and living radical polymerization, and then cellulose was used as the matrix in the preparation of polymer/clay nanocomposite, through a solution intercalation method. For this purpose, first, the graft polymerization of styrene (St) onto cellulose fibers was performed by using suspension polymerization and ...
متن کاملOptofluidic fabrication for 3D-shaped particles
Complex three-dimensional (3D)-shaped particles could play unique roles in biotechnology, structural mechanics and self-assembly. Current methods of fabricating 3D-shaped particles such as 3D printing, injection moulding or photolithography are limited because of low-resolution, low-throughput or complicated/expensive procedures. Here, we present a novel method called optofluidic fabrication fo...
متن کاملDoes Topology Drive Fiber Polymerization?
We have developed new procedures to examine the early steps in fibrin polymerization. First, we isolated fibrinogen monomers from plasma fibrinogen by gel filtration. Polymerization of fibrinogen monomers differed from that of plasma fibrinogen. The formation of protofibrils was slower and the transformation of protofibrils to fibers faster for the fibrinogen monomers. Second, we used formaldeh...
متن کاملBragg gratings inscription using PMMA polymer optical fibers drawn from preforms with specific thermal pre-treatment
In this work, fiber Bragg gratings (FBGs) are inscribed in various undoped poly(methyl methacrylate) (PMMA) polymer optical fibres (POFs) using different types of UV lasers and inscription time and their temperature and strain sensitivities are investigated. The polymer optical fiber Bragg gratings (POFBGs) were inscribed using two UV lasers: a continuous UV HeCd @325 nm laser and a pulsed UV K...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Lab on a chip
دوره 11 6 شماره
صفحات -
تاریخ انتشار 2011