Optimum dimple diameter for friction reduction with laser surface texturing: the effect of velocity gradient

This paper describes the modelling and testing of mm-scale hydrodynamic bearings which are being developed to improve the efficiency of a cm-scale turbine energy harvester, whose efficiency was previously limited by poorly lubricated commercial jewel-bearings. The bearings were fabricated using DRIE and their performance was assessed using a custom built MEMS tribometer. Results demonstrate that acceptably low friction is achieved when low viscosity liquid lubricants are used in combination with an appropriate choice of friction modifier additive. Further reduction in friction is demonstrated when the step height of bearing is adjusted in accordance with hydrodynamic theory. In parallel with the experiments, hydrodynamic lubricant modelling has been carried out to predict and further optimize film thickness and friction performance. Modelling results are presented and validated against experimental friction data.