Influence of Gas-Liquid Separator Design on Performance of Airlift Bioreactors

نویسنده

  • Mateus N. Esperança
چکیده

The performance of airlift bioreactors are closely related with their geometry, especially the gas-liquid separator design. In this study, the influence of the gas-liquid separator geometry on oxygen transfer and gas hold-up was evaluated in 10-L concentric-tube airlift bioreactor operating with distilled water and xanthan gum solution. The specific airflow rate (ɸAIR) exhibited the higher effect on the oxygen transfer coefficient (kLa) for both fluids. While the gas-liquid separator openness angle (α) and liquid volume fraction on the gas-liquid separator (VGLS) have presented opposite effects on oxygen mass transfer, they affected negatively the global gas hold-up of distilled water system. The best degassing zone geometry corresponded to a 90° openness angle with 10% of the liquid on it. Keywords—Airlift bioreactor, gas holdup, gas-liquid separator, oxygen transfer.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Mixing Studies in Loop Bioreactors for Production of Biomass from Natural Gas

The mixing behavior of the gas-liquid phase in three loop bioreactors was investigated. A gas-induced External Airlift Loop Bioreactor (EALB), a forced-liquid Vertical Tubular Loop Bioreactor (VTLB) and a forced-liquid Horizontal Tubular Loop Bioreactor (HTLB) were used for mixing studies as well as biomass production from natural gas. The effect of design parameters, riser to downcomer cro...

متن کامل

Comparison of Different Loop Bioreactors Based on Hydrodynamic Characteristics, Mass Transfer, Energy Consumption and Biomass Production from Natural Gas

The performance of a forced-liquid Vertical Tubular Loop Bioreactor (VTLB), a forced-liquid Horizontal Tubular Loop Bioreactor (HTLB) and a gas-induced External Airlift Loop Bioreactor (EALB) were compared for production of biomass from natural gas. Hydrodynamic characteristics and mass transfer coefficients were determined as functions of design parameters, physical properties of gases as ...

متن کامل

Hydrodynamic considerations in three-phase internal-loop airlift bioreactors – effect of dual separator and draught tube design

In recent years, there has been a growing interest in bioreactors, which utilise immobilised enzymes and cells in order to improve the bioprocess productivity. In fact, there are many specific advantages of the immobilised systems in comparison with the more conventional systems, in which the bio-agents are suspended freely (cells) or dissolved in a bulk aqueous medium (enzymes): • high cell de...

متن کامل

Axial inhomogeneities in steady-state dissolved oxygen in airlift bioreactors: predictive models

Models were developed for prediction and interpretation of the observed steady-state axial dissolved oxygen concentration profiles in tall airlift bioreactors. The observed concentration profiles were non-linear because of a combination of hydrodynamic and mass transport factors. The profiles were influenced mainly by the liquid-phase axial dispersion coefficient, the volumetric overall gas–liq...

متن کامل

Model for a solid-liquid airlift two-phase partitioning bioscrubber for the treatment of BTEX

BACKGROUND: Airlift solid–liquid two-phase partitioning bioreactors (SL-TPPBs) have been shown to be effective for the treatment of gas streams containing benzene, toluene, ethylbenzene and o-xylene (BTEX). The airlift SL-TPPB is a low-energy system that utilizes a sequestering phase of solid silicone rubber beads (10%v/v) that will uptake and release large amounts of BTEX in order to maintain ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2013