Inverse Kinematic Solutions for a Fully Parallel Robot with Singularity Robustness
نویسندگان
چکیده
In this paper, two inverse-kinematic solutions with singularity robustness for a fully parallel robot manipulator are proposed. First, two inverse-kinematic solutions are presented based on the damped leastsquares method, where the first solution (OSVC) is derived using a velocity constraint, and the other (OSFC) uses a force constraint. It can be shown that both solutions are special cases of a general damped least-squares method (GIKS). Next, under the assumption that direct position measurement is available, a feedback-correction term is introduced into the general damped least-squares method to eliminate positioning error in resolved-rate control. It can be shown that both solutions are stable with bounded errors, but each has its own relative merits and shortcomings. Illustrative examples are also given to show their effectiveness in practical applications.
منابع مشابه
Working Modes and Aspects in Fully Parallel Manipulators
The aim of this paper is to characterize the notion of aspect in the workspace and in the joint space for parallel manipulators. In opposite to the serial manipulators, the parallel manipulators can admit not only multiple inverse kinematic solutions, but also multiple direct kinematic solutions. The notion of aspect introduced for serial manipulators in [1], and redefined for parallel manipula...
متن کاملKinematic Synthesis of Parallel Manipulator via Neural Network Approach
In this research, Artificial Neural Networks (ANNs) have been used as a powerful tool to solve the inverse kinematic equations of a parallel robot. For this purpose, we have developed the kinematic equations of a Tricept parallel kinematic mechanism with two rotational and one translational degrees of freedom (DoF). Using the analytical method, the inverse kinematic equations are solved for spe...
متن کاملSolution of Inverse Kinematic Problem of a 2DOF Robot Using Decomposition Method
The inverse kinematics problem of a two degree of freedom (2DOF) planar robot arms issolved using Adomian’s decomposition method (ADM), after converting to a system of twononlinear algebraic equations. The advantage of the method is that it gives the solutions asfunctions of the desired position of the end effecter and the length of the arms. The accuracyof the solutions can be increased up to ...
متن کاملDesign and Kinematic Analysis of a 4-DOF Serial-Parallel Manipulator for a Driving Simulator
This paper presents the kinematic analysis and the development of a 4-degree-of-freedom serial-parallel mechanism for large commercial vehicle driving simulators. The degrees of freedom are selected according to the target maneuvers and the structure of human motion perception organs. Several kinematic properties of parallel part of the mechanism under study are investigated, including the inve...
متن کاملWorking Modes and Aspects in Fully-Parallel Manipulator
The aim of this paper is to characterize the notion of aspect in the workspace and in the joint space for parallel manipulators. In opposite to the serial manipulators, the parallel manipulators can admit not only multiple inverse kinematic solutions, but also multiple direct kinematic solutions. The notion of aspect introduced for serial manipulators in [1], and redefined for parallel manipula...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- I. J. Robotics Res.
دوره 18 شماره
صفحات -
تاریخ انتشار 1999