new arc starter and cycle- by- cycle current control strategy for improving the operation of inverter based arc welding supply

H2/H∞ Robust Controller of the Arc Welding Inverter Power

There are a lot of interference sources in the system of the arc welding inverter power. In this paper, a small-signal model which was built by the method of statespace average was quoted. A control system which comprised an interference of load resistance and an interference of power supply fluctuation was built. A H2/H∞ state -feedback controller was designed in the method of LMI. The simulat...

Monitoring of Arc Welding Process Based on Arc Light Emission

Control of pulsed gas metal arc welding

This paper presents a control system for manual pulsed Gas Metal Arc Welding (GMAW). This system consists of a current controller, which makes it possible to shape the current during welding, and two important components, which are the key issues discussed in this paper. These components include an arc length controller and a metal transfer controller. The arc length controller is based on a no...

Welding of Rails with New Technology of Arc Welding

D. Bajic, University of Montenegro, Faculty of Mechanical Engineering, G. Vladimirovich Kuzmenko, E.O. Paton Electric Welding Institute, National Academy of Sciences Ukraine, I. Samardžić, J.J.Strossmayer university of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Croatia The paper presents up-to-date achievements in application of a new method of arc welding of various rail profi l...

Arc-transitive cycle decompositions of tetravalent graphs

A cycle decomposition of a graph Γ is a set C of cycles of Γ such that every edge of Γ belongs to exactly one cycle in C. Such a decomposition is called arc-transitive if the group of automorphisms of Γ that preserve C setwise acts transitively on the arcs of Γ . In this paper, we study arc-transitive cycle decompositions of tetravalent graphs. In particular, we are interested in determining an...

Gas tungsten arc welding

Gas tungsten arc welding (GTAW), also known as tungsten inert gas (TIG) welding, is an arc welding process that uses a nonconsumable tungsten electrode to produce the weld. The weld area is protected from atmospheric contamination by a shielding gas (usually an inert gas such as argon), and a filler metal is normally used, though some welds, known as autogenous welds, do not require it. A const...