numerical investigation of nanofluid mixed convection and entropy generation in an inclined ventilating cavity
نویسندگان
چکیده
this paper presents results of a numerical study of mixed convection and entropy generation of cu–water nanofluid in a square ventilating cavity at different inclination angles. except a piece of bottom wall with a uniform heat flux, all of the cavity walls are insulated. the inlet port is placed at the bottom of the left wall and the outlet port is positioned at the top of the right wall. entropy generation, bejan number, average nusselt number and heat source temperature have been investigated for richardson numbers between 0.1 and 10, reynolds numbers in the range of 1 and 300, solid volume fractions between 0 and 0.06 and cavity inclination angles between ԟ90o and 90o. the results show that the average nusselt number increases with increasing richardson number for cavity inclination angle of 30o, 60o and 90o but decreases with increasing richardson number for inclination angle of ԟ30o, ԟ60o and ԟ90o. total entropy generation and entropy generation due to heat transfer decreases with increasing richardson and reynolds numbers, but the bejan number increases with increasing reynolds and richardson numbers.
منابع مشابه
Numerical Investigation of Nanofluid Mixed Convection and Entropy Generation in an Inclined Ventilating Cavity
This paper presents results of a numerical study of mixed convection and entropy generation of Cu–water nanofluid in a square ventilating cavity at different inclination angles. Except a piece of bottom wall with a uniform heat flux, all of the cavity walls are insulated. The inlet port is placed at the bottom of the left wall and the outlet port is positioned at the top of the right wall....
متن کاملNumerical Investigation into Natural Convection and Entropy Generation in a Nanofluid-Filled U-Shaped Cavity
This current work studies the heat transfer performance and entropy generation of natural convection in a nanofluid-filled U-shaped cavity. The flow behavior and heat transfer performance in the cavity are governed using the continuity equation, momentum equations, energy equation and Boussinesq approximation, and are solved numerically using the finite-volume method and SIMPLE C algorithm. The...
متن کاملNumerical simulation of mixed convection heat transfer of nanofluid in an inclined enclosure by applying LBM
Mixed convection of Cu-Water nanofluid is studied numerically in a shallow inclined enclosure by applying lattice Boltzmann method. The D2Q9 lattice and internal energy distribution function based on the BGK collision operator are used in order to develop the thermal flow field. The enclosure's hot lid has the constant velocity of U0 while its cold lower wall has no motion. Moreover, sidewalls ...
متن کاملEntropy Generation at Natural Convection in an Inclined Rectangular Cavity
Natural convection in an inclined rectangular cavity filled with air is numerically investigated. The cavity is heated and cooled along the active walls whereas the two other walls of the cavity are adiabatic. Entropy generation due to heat transfer and fluid friction has been determined in transient state for laminar natural convection by solving numerically: the continuity, momentum and energ...
متن کاملNumerical simulation of Al2O3–water nanofluid mixed convection in an inclined annulus
Laminar mixed convection of Aluminium oxide (Al2O3)–water nanofluid flow in an inclined annulus using a single-phase approach was numerically studied. Constant heat flux boundary conditions were applied on the inner and outer walls. All the thermophysical properties of nanofluid, such as, viscosity, heat capacity, thermal conductivity, and thermal expansion coefficient, except density in the bo...
متن کاملNumerical simulation of Al2O3–water nanofluid mixed convection in an inclined annulus
Laminar mixed convection of Aluminium oxide (Al2O3)–water nanofluid flow in an inclined annulus using a single-phase approach was numerically studied. Constant heat flux boundary conditions were applied on the inner and outer walls. All the thermophysical properties of nanofluid, such as, viscosity, heat capacity, thermal conductivity, and thermal expansion coefficient...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
journal of nanostructuresناشر: university of kashan
ISSN 2251-7871
دوره 2
شماره 4 2012
کلمات کلیدی
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023