evaluating bond strength of porcelain to dental alloys and the effects of repeated porcelain sintering on it
نویسندگان
چکیده
in this study, porcelain bond strength to three different alloys of gold-base, pd-ag and base-metal were compared and the effect of repeated porcelain sintering on bond strength was evaluated. the obtained results showed best bond strength of porcelain with gold-base alloy. pd-ag and base-metal alloys showed less strength respectively. during repeated sintering of porcelain, bond strength has not changed in base-metal and gold-base alloys while it was weakened in pd-ag alloy.
منابع مشابه
Effect of Opaque Porcelain Thickness Bond Strength of Porcelain to Ni-Cr Alloys
Objectives: Metal-ceramic restorations are the standard by which all esthetic restorations are measured. Fracture of dental restorations is a multifactorial problem, which is serious and costly. Debonding of porcelain from metal substructure and the bond strength depend on many factors. The purpose of this study was to determine whether or not the opaque porcelain thickness has a significant ef...
متن کاملEffects of surface treatments and cement types on the bond strength of porcelain-to-porcelain repair.
PURPOSE The purpose of this in vitro study was to evaluate the effects of four surface treatments and two resin cements on the repair bond strength of a ceramic primer. MATERIALS AND METHODS Eighty-eight pairs of disks (10 and 5 mm in diameter, 3 mm thickness) were prepared from heat-pressed feldspar ceramics (GC Initial IQ). After being stored in mucin-artificial saliva for 2 weeks, the 10-m...
متن کاملComparison of the Effect of Three methods of Porcelain Surface Treatment on Shear Bond Strength of Composite to Porcelain
Background and Aim: Several methods are available for intraoral repair of chipped porcelain restorations by composite resin. Also, there is still controversy regarding the best method of porcelain repair in terms of bond strength and cost effectiveness. This study aimed to compare three methods of porcelain surface treatment on shear bond strength (SBS) of composite to porcelain. Materials a...
متن کاملبررسی مقاومت باند پرسلن با آلیاژهای دندانپزشکی و اثر پخت مکرر پرسلن بر آن
In this study, porcelain bond strength to three different alloys of Gold-base, pd-Ag and base-Metal were compared and the effect of repeated porcelain sintering on bond strength was evaluated. The obtained results showed best bond strength of porcelain with Gold-base alloy. Pd-Ag and Base-metal alloys showed less strength respectively. During repeated sintering of porcelain, bond strength has...
متن کاملThe shear strength of dental porcelain.
The widespread use of porcelain in restorative dentistry is generally due to its esthetic appearance even though it is brittle. The transverse strength, or modulus rupture, averages around 108 MPa (16,000 psi) for aluminous porcelain and 88 MPa (13,000 psi) for feldspathic porcelain. The tensile strength, as determined by diametral compression, is approximately 29 MPa (4,200 psi) for opaque fel...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
مجله دندانپزشکیجلد ۱۱، شماره ۲، صفحات ۴۲-۵۰
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023