joining of al-foam to plate in sandwich structures
نویسندگان
چکیده
structural sandwich beams are widely used because of their high specific stiffness and strength, noise reduction, thermal insulation and impact energy absorption characteristics. conventional manufacturing method of composite sandwich structures is completed by a separate adhesive joining stage by which the composite faces are joined to the core. in this investigation, liquid phase sintering in the al-zn alloy system was used in order to form a diffusion bond between metallic foam and plate. joining treatment was conducted at 610 oc for 30 minutes in an inert atmosphere. the shear strength of the joint was measured to be about 4.8 kpa.
منابع مشابه
Joining Ceramics to Metals using Metallic Foam
A general method for brazing ceramics to metals using a compliant metallic foam as a buffer layer has been developed. Using stainless steel foams, bonds between alumina and 316 stainless steel with shear strengths up to 33 MPa have been achieved. The resultant ductility enhances the resistance of the joint to thermal cycling; AlN-Inconel 600 bonds exhibited good thermal shock resistance. Alumin...
متن کاملData characterizing flexural properties of Al/Al2O3 syntactic foam core metal matrix sandwich.
Microstructural observations and flexural property datasets are provided for aluminum alloy matrix syntactic foam core sandwich composites. The tests are conducted in three-point bending configuration. The data supplied includes methods used for conducting microscopy and mechanical testing. Raw load-displacement data, which is used to plot stress-strain graphs, obtained during the flexural test...
متن کاملData characterizing compressive properties of Al/Al2O3 syntactic foam core metal matrix sandwich
Microstructural observations and compressive property datasets of metal matrix syntactic foam core sandwich composite at quasi-static and high strain rate (HSR) conditions (525-845 s(-1)) are provided. The data supplied in this article includes sample preparation procedure prior to scanning electron and optical microscopy as well as the micrographs. The data used to construct the stress-strain ...
متن کاملEffects of Ply Stacking Sequence in 3D Fiber Reinforced Foam Core Sandwich Structures with Defects
Foam core sandwich composites are widely used in primary structural components of launch vehicles and spacecraft. These structures exhibit complex failure modes and are highly sensitive to butt-joints, core mismatches, impact damage, voids, and facesheet delaminations. 3D Fiber Reinforced Foam Cores (3DFRFC) represent a new class of core material designed to replace standard foam core in future...
متن کاملThe effect of temperature on the failure modes of polymer foam cored sandwich structures
The influence of elevated temperature on the stability of sandwich structures is investigated. A new analytical solution is proposed that enables the calculation of the critical wrinkling stress in sandwich beams subjected to load and elevated temperatures. The effect of a through thickness temperature gradient is accounted for by imposing different stiffnesses of the core for the different tem...
متن کاملDetermining Effective Interface Fracture Properties of 3D Fiber Reinforced Foam Core Sandwich Structures
Foam core sandwich composites are finding a wider breadth of use in aerospace, automotive, and construction applications. These structures present unique challenges in terms of material failure and interaction and are highly sensitive to damage and imperfections introduced during manufacturing. An emerging class of 3D Fiber Reinforced Foam Core (3DFRFC) aims to replace monolithic foams used in ...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
مهندسی متالورژی و موادجلد ۲۶، شماره ۱، صفحات ۹۷-۰
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023