free vibration analysis of circular sandwich plates with clamped fg face sheets

نویسندگان

younes mohammadi

assistant professor, department of industrial engineering and mechanical engineering, islamic azad university, qazvin, iran. keivan h safari

assistant professor, department of industrial engineering and mechanical engineering, islamic azad university, qazvin, iran. mohsen rahmani

phd student, department of industrial engineering and mechanical engineering, islamic azad university, qazvin, iran.

چکیده

free vibration of sandwich plates with temperature dependent functionally graded (fg) face sheets in various thermal environments is investigated. the material properties of fg face sheets are assumed to be temperature-dependent and vary continuously through the thickness according to a power-law distribution in terms of the volume fractions of the constituents. also, the material properties of the core are assumed to be temperature dependent. the governing equations of motion in polar system and in free natural vibration are derived using hamilton’s principle and galerkin method is used to solve the equations and obtain the natural frequency. in-plane stresses of the core that usually are ignored in the vibration characteristics of the sandwich structures are considered in this formulation. the results obtained by galerkin method for symmetric circular sandwich plate with fixed support is compared with finite element method that obtained by abaqus and good agreement is found. the results show that varying the power-law index and temperature have important effects on natural frequency.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Free vibration analysis of circular sandwich plates with clamped FG face sheets

  Free vibration of sandwich plates with temperature dependent functionally graded (FG) face sheets in various thermal environments is investigated. The material properties of FG face sheets are assumed to be temperature-dependent and vary continuously through the thickness according to a power-law distribution in terms of the volume fractions of the constituents. Also, the material properties ...

متن کامل

Analysis of Viscoelastic Functionally Graded Sandwich Plates with CNT Reinforced Composite Face Sheets on Viscoelastic Foundation

In this article, bending, buckling, and free vibration of viscoelastic sandwich plate with carbon nanotubes reinforced composite facesheets and an isotropic homogeneous core on viscoelastic foundation are presented using a new first order shear deformation theory. According to this theory, the number of unknown’s parameters and governing equations are reduced and also the using of shear correct...

متن کامل

Bending Analysis of Composite Sandwich Plates with Laminated Face Sheets: New Finite Element Formulation

The bending behavior of composites sandwich plates with multi-layered laminated face sheets has been investigated, using a new four-nodded rectangular finite element formulation based on a layer-wise theory. Both, first order and higher-order shear deformation; theories are used in order to model the face sheets and the core, respectively. Unlike any other layer-wise theory, the number of degre...

متن کامل

Bending Behavior of Sandwich Plates with Aggregated CNT-Reinforced Face Sheets

The main aim of this paper is to investigate bending behavior in sandwich plates with functionally graded carbon nanotube reinforced composite (FG-CNTRC) face sheets with considering the effects of carbon nanotube (CNT) aggregation. The sandwich plates are assumed resting on Winkler-Pasternak elastic foundation and a mesh-free method based on first order shear deformation theory (FSDT) is devel...

متن کامل

Transverse Vibration of Clamped and Simply Supported Circular Plates with an Eccentric Circular Perforation and Attached Concentrated Mass

In this investigation Rayleigh-Ritz variational method has been applied to determine the least natural frequency coefficient for the title problem. Classical plate theory assumptions have been used to calculate strain energy and kinetic energy. Coordinate functions are combination of polynomials which satisfy boundary conditions at the outer boundary and trigonometric terms. In the second part ...

متن کامل

Free vibration analysis of circular plates with multiple circular holes using indirect BIEMs

In this paper, a semi-analytical approach is proposed to solve natural frequencies and natural modes for circular plates with multiple circular holes by using the indirect formulation in conjunction with degenerate kernels and Fourier series. All the kernels in the indirect formulation are expanded into degenerate form. By uniformly collocating points on the boundary, a linear algebraic system ...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
فصلنامه علمی پژوهشی مهندسی مکانیک جامدات واحد خمینی شهر

جلد ۹، شماره ۴، صفحات ۶۳۱-۶۴۶

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023