assessment of bond strength between metal brackets and non-glazed ceramic in different surface treatment methods

نویسندگان

ms. ahmad akhoundi associate professor, dental research center, tehran university of medical sciences, tehran, iran

m. rahmati kamel orthodontist, private practice

t. hooshmand assistant professor, department of dental materials, school of dentistry, tehran university of medic

i. harririan associate professor, department of pharmaceutics, school of pharmacy, tehran university of medical s

چکیده

objective:   the aim of this study was to evaluate the bond strength between metal brackets and non-glazed ceramic with three different surface treatment methods. materials and methods: forty-two non-glazed ceramic disks were assigned into three groups. group i and ii specimens were etched with 9.5% hydrofluoric acid. subsequently in group i, silane and adhesive were applied and in group ii, bonding agent was used only. in group iii, specimens were treated with 35% phosphoric acid and then silane and adhesive were applied. brackets were bonded with light-cured composites. the specimens were stored in water in room temperature for 24 hours and then thermocycled 500 times between 5°c and 55°c. results: the difference of tensile bond strength between groups i and iii was not significant (p=0.999). however, the tensile bond strength of group ii was significantly lower than groups i, and iii (p<0.001). the adhesive remnant index scores between the three groups had statistically significant differences (p<0.001). conclusion: with the application of scotch bond multi-purpose plus adhesive, we can use phosphoric acid instead of hydrofluoric acid for bonding brackets to non-glazed ceramic restorations.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Assessment of Bond Strength between Metal Brackets and Non-Glazed Ceramic in Different Surface Treatment Methods

OBJECTIVE The aim of this study was to evaluate the bond strength between metal brackets and non-glazed ceramic with three different surface treatment methods. MATERIALS AND METHODS Forty-two non-glazed ceramic disks were assigned into three groups. Group I and II specimens were etched with 9.5% hydrofluoric acid. Subsequently in group I, silane and adhesive were applied and in group II, bond...

متن کامل

Tensile bond strength of metal bracket bonding to glazed ceramic surfaces with different surface conditionings

OBJECTIVE The objective of this study was to compare the tensile bond strength of metal brackets bonding to glazed ceramic surfaces using three various surface treatments. MATERIALS AND METHODS Forty two glazed ceramic disks were assigned to three groups. In the first and second groups the specimens were etched with 9.5% hydrofluoric acid (HFA). Subsequently in first group, ceramic primer and...

متن کامل

tensile bond strength of metal bracket bonding to glazed ceramic surfaces with different surface conditionings

objective: the objective of this study was to compare the tensile bond strength of metal brackets bonding to glazed ceramic surfaces using three various surface treatments. materials and methods: forty two glazed ceramic disks were assigned to three groups. in the first and second groups the specimens were etched with 9.5% hydrofluoric acid (hfa). subsequently in first group, ceramic primer and...

متن کامل

Influence of various surface-conditioning methods on the bond strength of metal brackets to ceramic surfaces.

With the increase in adult orthodontic treatment comes the need to find a reliable method for bonding orthodontic brackets onto metal or ceramic crowns and fixed partial dentures. In this study, shear bond strength and surface roughness tests were used to examine the effect of 4 different surface conditioning methods: fine diamond bur, sandblasting, 5% hydrofluoric acid, and silica coating for ...

متن کامل

Factors affecting the shear bond strength of metal and ceramic brackets bonded to different ceramic surfaces.

The aims of this study were to evaluate the shear bond strength (SBS) of metal and ceramic brackets bonded to two different all-ceramic crowns, IPS Empress 2 and In-Ceram Alumina, to compare the SBS between hydrofluoric acid (HFA), phosphoric acid etched, and sandblasted, non-etched all-ceramic surfaces. Ninety-six all-ceramic crowns were fabricated resembling a maxillary left first premolar. T...

متن کامل

Effects of surface conditioning on bond strength of metal brackets to all-ceramic surfaces.

The aim of this study was to determine the effectiveness of bonding brackets to ceramic restorations. Sixty feldspathic and 60 lithium disilicate ceramic specimens were randomly divided into six groups. Shear bond strength (SBS) and bond failure types were examined with six surface-conditioning methods: silane application to glazed surface, air particle abrasion (APA) with 25- and 50-microm alu...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید


عنوان ژورنال:
journal of dentistry, tehran university of medical sciences

جلد ۷، شماره ۲، صفحات ۶۴-۷۰

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023