effect of methanol concentration and channel depth on performance of direct methanol fuel cell
نویسندگان
چکیده
effect of methanol concentration and channel depth of bipolar plates on the performance of single direct methanol fuel cell was investigated experimentally. the membrane used in this experiment was nafion117. dimension of the single cell were 10cm 10 cm. methanol concentrations of 0.50, 1.0, 1.5, 2.0, 3.0 molar were used. channel depth of the bipolar plates were chosen to be 1.0, 1.5, 2.0 mm, and in order to investigate the effect of channel depth, anode channel depth and cathode depth were changed simultaneously. optimized methanol concentration for the single cell were 0.5-1.5 molar. based on different experiments, as channel depth is decreased, mass transfer is improved and removal of carbone dioxide takes place easier. the results indicate that the best channel depth for this kind of single cell is 1.0 mm.
منابع مشابه
Liquid methanol concentration sensors for direct methanol fuel cells
Liquid-fed direct methanol fuel cells (DMFCs) are one of the most promising candidates for portable power electronics and automotive pplications due to their potentially high-energy density, simple storage, and distribution of the fuel. The concentration of methanol in the fuel irculation loop of a DMFC system is an important operating parameter, because it determines the electrical performance...
متن کاملSelectivity of Direct Methanol Fuel Cell Membranes
Sulfonic acid-functionalized polymer electrolyte membranes alternative to Nafion(®) were developed. These were hydrocarbon systems, such as blend sulfonated polyetheretherketone (s-PEEK), new generation perfluorosulfonic acid (PFSA) systems, and composite zirconium phosphate-PFSA polymers. The membranes varied in terms of composition, equivalent weight, thickness, and filler and were investigat...
متن کاملFunctionalized and Electrospun Polymeric Materials as High-Performance Membranes for Direct Methanol Fuel Cell: A Review
Proton exchange membranes (PEM) for a direct methanol fuel cell (DMFC) have main drawbacks which are methanol permeability, reduced proton conductivity and the cost of the membrane. This paper reviews different polymeric materials such as fluorinated, non-fluorinated, acid-base complex, and composite membranes for DMFC. Currently, nonfluorinated membranes gain a lot of atte...
متن کاملAerosol Feed Direct Methanol Fuel Cell
U.S. PATENT DOCUMENTS 4,729,931 A * 311988 Grimble ...................... 429117 5,047,299 A * 911991 Schockling .................. 429120 5,164,060 A * 1111992 Eisman et al. ................ 429112 5,169,730 A * 1211992 Reichner et al. .............. 429120 5,527,631 A * 611996 Singh et al. .................. 429120 5,561,000 A 1011996 Dirven et al. 5,582,632 A 1211996 Nohr et al. 5,593,721 A ...
متن کاملDirect Methanol Fuel Cell Thermodynamic Simulation
The direct methanol fuel cell (DMFC) is considered a viable power production technology for portable electronics equipment (10’s-100’s watts) and transportation vehicles (10’s-100’s kilowatts). Since methanol is relatively inexpensive and a reformer or other fuel processing equipment is not required for the DMFC, this power system has the potential to be low cost, compact, reliable and fuel eff...
متن کاملFabrication of Nanocomposite Membrane via Combined Electrospinning and Casting Technique for Direct Methanol Fuel Cell
Emergence of nanotechnology has resulted in the introduction of the electrospinning process in fabricating and characterising the polymer electrolyte membrane from the sulfonated poly (ether ether ketone) (SPEEK) nanocomposite membrane comprised of electrospun Cloisite15A® (e-spun CL...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
international journal of advanced design and manufacturing technologyجلد ۳، شماره ۴، صفحات ۱۹-۲۶
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023