the influence of edm parameters in finishing stage on surface quality using artificial neural network
نویسندگان
چکیده
in this work, the influence of different edm parameters (pulse current, pulse voltage, pulse on-time , pulse off-time) in finishing stage on the surface roughness (r a ) as a result of application copper electrode to a workpiece( cold work steel din1.2379) has been investigated. design of the experiment was chosen as full factorial. statistical analysis has been done and artificial neural network has been used to choose proper machining parameters and to reach certain surface roughness. the experiment results indicated a good performance of proposed method in optimization of such a complex and non-linear problems.
منابع مشابه
A Review: Influence of electrode geometry and process parameters on surface quality and MRR in EDM using Artificial Neural Network
Electrical Discharge Machining (EDM) is a non conventional machining process, where electrically conductive materials are machined by using precisely controlled sparks that occur between an electrode and a work piece in the presence of a dielectric fluid. It has been a demanding research area to model and optimize the EDM process in the present scenario. Lots of efforts have been exercised to m...
متن کاملscour modeling piles of kambuzia industrial city bridge using hec-ras and artificial neural network
today, scouring is one of the important topics in the river and coastal engineering so that the most destruction in the bridges is occurred due to this phenomenon. whereas the bridges are assumed as the most important connecting structures in the communications roads in the country and their importance is doubled while floodwater, thus exact design and maintenance thereof is very crucial. f...
Influence of EDM Characteristic Parameters on the Surface Microstructure in CK45 Alloy Steel
Electro Discharge Machining (EDM) is a very efficient machining process widely used in manufacturing components of complicated geometry. Based on its nature, i.e. material removal by electric discharge, the process induces thermal stresses that in turn result in generation of wide spread micro-cracks on the surface of the machined part. In this paper the influence of EDM characteristic paramete...
متن کاملSurface Tension Prediction of Hydrocarbon Mixtures Using Artificial Neural Network
In this study, artificial neural network was used to predict the surface tension of 20 hydrocarbon mixtures. Experimental data was divided into two parts (70% for training and 30% for testing). Optimal configuration of the network was obtained with minimization of prediction error on testing data. The accuracy of our proposed model was compared with four well-known empirical equations. The arti...
متن کاملon the relationship between using discourse markers and the quality of expository and argumentative academic writing of iranian english majors
the aim of the present study was to investigate the frequency and the type of discourse markers used in the argumentative and expository writings of iranian efl learners and the differences between these text features in the two essay genres. the study also aimed at examining the influence of the use of discourse markers on the participants’ writing quality. to this end the discourse markers us...
15 صفحه اولINFLUENCE OF FIBER ASPECT RATIO ON SHEAR CAPACITY OF DEEP BEAMS USING ARTIFICIAL NEURAL NETWORK TECHNIQUE
This paper deals with the effect of fiber aspect ratio of steel fibers on shear strength of steel fiber reinforced concrete deep beams loaded with shear span to depth ratio less than two using the artificial neural network technique. The network model predicts reasonably good results when compared with the equation proposed by previous researchers. The parametric study invol...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
international journal of advanced design and manufacturing technologyجلد ۶، شماره ۴، صفحات ۱۷-۲۲
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023