hardness evaluation of composite resins cured with qth and led
نویسندگان
چکیده
background and aims. today light cured composites are widely used. physical and mechanical properties of composites are related to the degree of conversion. light curing unit (lcu) is an important factor for composite polymerization. aim of this study is evaluation of composite resins hardness using halogen and led light curing units. materials and methods. in this study, 30 samples of filtek z250 and c-fill composite resins were provided. samples were light cured with ultralume2, valo and astralis7. vickers hardness number (vhn) was measured in 0, 1, 2 mm depth. statistical analysis used: data were analysed by spss software and compared with each other by t-test, one-way and two-way anova and post-hoc tukey test. results. in filtek z250, at top surface, vhn of ultralume2 was higher than vhn of valo (p = 0.02) and astralis7 (p = 0.04), but in depth of 1, 2 mm, vhn of ultralume2 and astralis7 were almost the same and both lcus were more than valo which the difference between ultralume2 and valo was significant in depth of 1mm (0.05) and 2mm (0.02). in c-fill composite, at top surface, astralis7 showed higher vhn, but in depth of 2 mm, performance of all devices were rather similar. conclusion. in z250, which contains camphorquinone initiator, light cure led ultra-lume2 with narrow wavelength showed higher hardness number than valo. in c-fill, in top surface, astralis7 with more exposure time, resulted higher vhn. but in depth of 2 mm, various light curing devices had rather similar hardness number.
منابع مشابه
Hardness Evaluation of Composite Resins Cured with QTH and LED
UNLABELLED Background and aims. Today light cured composites are widely used. Physical and mechanical properties of composites are related to the degree of conversion. Light curing unit (LCU) is an important factor for composite polymerization. Aim of this study is evaluation of composite resins hardness using halogen and LED light curing units. Materials and methods. In this study, 30 samples ...
متن کاملvickers hardness of composite resins cured with led and qth units
statement of problem: one of the factors affecting the degree of polymerization of light-cured composites is the type of light-curing unit used. in addition, physicomechanical properties of composite resins depend on the degree of conversion and polymerization. objectives(s): since the type of initiator in new composite resins is not explained by manufacturers, this study is an attempt to compa...
متن کاملComparison of Surface Hardness of Various Shades of Twinky Star Colored Compomer Light-cured with QTH and LED Units
INTRODUCTION Colored compomers are a group of restorative materials that were introduced in 2002 to repair primary teeth, and they provide attractive color and ease of use in pediatric dentistry. The aim of this study was to evaluate the effect of QTH and LED light-curing units on the surface hardness of different colors of Twinky Star compomers. METHODS In this experimental study, a composit...
متن کاملHardening of dual-cure resin cements and a resin composite restorative cured with QTH and LED curing units.
OBJECTIVE The aim of this study was to determine the effects of light intensity and type of light unit (quartztungsten-halogen [QTH] or light-emitting diode [LED]) on the hardening of various resin cements and a resin composite restorative. METHODS Disk specimens were prepared from 4 dual-cured resin cements (Variolink II, Calibra, Nexus 2 and RelyX ARC). Two QTH light-curing units (Visilux 2...
متن کاملColor Stability of a Microhybrid Resin Composite Polymerized with LED and QTH Light Curing Units
Introduction: Discoloration of resin composites is a common reason for replacement of these restorations. The aim of this study was to eva-luate the influence of different light curing de-vices on color stability of a microhybrid resin composite. Materials and Methods: 80 disc-shaped speci-mens (8 mm in diameter, 2-mm height) were fabricated from filtek Z250 resin composite. Specimens wer...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
journal of dental research, dental clinics, dental prospectsجلد ۸، شماره ۱، صفحات ۴۰-۴۴
کلمات کلیدی
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023