prediction of spray breakup specifications by investigation of nonlinear spray instability growth
نویسندگان
چکیده
in this study a nonlinear asymmetric instability analysis carried out to study primary atomization of annular liquid sheets emanating from the prefilming airblast atomizer using a perturbation method and potential flow assumption. in this direction, firstly governing equations derived according to potential flow assumption and conservation equations while dynamic and static boundary condition at the interface are considered. the first and second order equation is solved using mathematica. in order to evaluate the results, model results in 2d geometry compared with results of jazayeri 2d sheet instability analysis. then the variation of deduced instability growth rate against wave number, compared with the results of other researchers. at next step an experimental test performed to measure of primary breakup length of an airblast atomizer and the result compared with the primary breakup length which deduced from nonlinear and linear instability analysis. finally the primary breakup length of nonlinear study compared with a curve, which fitted on experimental results at various we number.
منابع مشابه
LES of atomizing spray with stochastic modeling of secondary breakup
A stochastic subgrid model for large-eddy simulation of atomizing spray is developed. Following Kolmogorov!s concept of viewing solid particle-breakup as a discrete random process, atomization of liquid blobs at high relative liquid-to-gas velocity is considered in the framework of uncorrelated breakup events, independent of the initial droplet size. Kolmogorov!s discrete model of breakup is re...
متن کاملSimulation of Primary Breakup for Diesel Spray with Phase Transition
A continuum formalism for describing the behavior of primary atomization with phase transition is presented, which includes the effects of heat and mass transfer of the two phase flow, the formation of ligaments and droplets, surface tension force and turbulence. Simulation of liquid jet primary atomization given by Marcus Herrmann (A balanced force refined level–set grid method for two–phase f...
متن کاملinvestigation of effective parameters on the rigidity of light composite diaphragms (psscb) by fem
در این رساله با معرفی سقف های psscb متشکل از ترکیب ورق های فولادی ذوزنقه ای و تخته های سیمانی الیافی به عنوان سقف های پیش ساخته (سازگار با سیستم سازه ای قاب های فولادی سبک) به بررسی پارامترهای موثر بر صلبیت سقف، پرداخته می شود. در تحقیق حاضر ابتدا به مدل سازی دو نمونه سقف آزمایش شده، به روش اجزاء محدود با استفاده از نرم افزار تحلیلی abaqus ver 6.10 پرداخته شده است. نمونه های ساخته شده تحت اعما...
Effects of Spray Drying and Spray Chilling on Ibuprofen Dissolution
The formulation of hydrophobic drugs for oral drug delivery is challenging due to poor solubility, poor dissolution and poor wetting of these drugs. Consequently, the aim of this study was to improve the dissolution of a model poorly water soluble drug, ibuprofen. Microparticles containing ibuprofen were produced by spray drying and spray chilling technology in the absence/presence of a ...
متن کاملInvestigation on the Trajectory Planning of Spray Gun of Spray Robot and Its Spraying Effect
The industrial robot plays a very important role in stabilizing and improving the quality of products, production efficiency, working conditions and the rapid upgrading of products. It is often composed of a mechanical body, control device, driving system and detection and sensing device, and can be used in three-dimensional space to complete integration of automatic production and processing e...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
مکانیک سیالات و آیرودینامیکجلد ۱۳۹۳، شماره ۲، صفحات ۰-۰
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023