finite-element model developing of median crack nucleation and growth in bk7 glass micro-machining
نویسندگان
چکیده
0
منابع مشابه
Finite Element Model of Crack Growth under Mixed Mode Loading
In this paper, in order to predict the crack growth trajectory and to evaluate the SIF under mixed modes (I & II), one proposes a new finite element program for crack growth using the source code written in FORTRAN. The fin ite element mesh is generated using an advancing front method, where the generation of the background mesh and the construction of singular elements are also added to this d...
متن کاملSpatial convergence of crack nucleation using a cohesive finite-element model on a pinwheel-based mesh
We consider the use of initially rigid cohesive interface models in a two-dimensional dynamic finiteelement solution of a fracture process. Our focus is on convergence of finite-element solutions to a solution of the undiscretized medium as the mesh spacing x (and therefore time-step t) tends to zero. We propose the use of pinwheel meshes, which possess the ‘isoperimetric property’ that for any...
متن کاملCombined Finite- and Boundary-Element Analysis of SCC Crack Growth
Modeling of stress corrosion cracking (SCC) is performed using the combination of the finite element method and the symmetric Galerkin boundary element method. The uncracked structural component is represented with finite elements. The crack is simulated using the boundary element method. The superposition principle is employed for combining two solutions. The equilibrium state for the system o...
متن کاملA simple technique for avoiding convergence problems in finite element simulations of crack nucleation and growth on cohesive interfaces
Numerical simulations of crack initiation which use a cohesive zone law to model a weak interface in the solid are often limited by the occurrence of an elastic snap-back instability. At the point of instability, quasi-static finite element computations are unable to converge to an equilibrium solution, which usually terminates the calculation and makes it impossible to follow the postinstabili...
متن کاملFinite Element-Based Model for Crack Propagation in Polycrystalline Materials∗
In this paper, we use an extended form of the finite element method to study failure in polycrystalline microstructures. Quasi-static crack propagation is conducted using the extended finite element method (X-FEM) and microstructures are simulated using a kinetic Monte Carlo Potts algorithm. In the X-FEM, the framework of partition of unity is used to enrich the classical finite element approxi...
متن کاملA Finite Element Method for Crack Growth without Remeshing
An improvement of a new technique for modelling cracks in the nite element framework is presented. A standard displacement-based approximation is enriched near a crack by incorporating both discontinuous elds and the near tip asymptotic elds through a partition of unity method. A methodology that constructs the enriched approximation from the interaction of the crack geometry with the mesh is d...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
مهندسی مکانیک مدرسجلد ۱۵، شماره ویژه نامه -۱۳، صفحات ۲۴-۲۸
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023