effect of variety, time harvesting and fruit size on pomegranate mechanical properties
نویسندگان
چکیده
in this research, the effect of variety, harvesting time and fruit size were investigated on the mechanical properties of skin, density and mechanical strength. the results showed that pomegranate cultivars (ardestani, shisheh-cap and malas) had different skin thickness resulting difference in forces required for penetration of pomegranate fruit (10%). the skin of shisheh-cap variety was thicker than others. mechanical strength of shisheh-cap and ardestani varieties were 453 and 428 n respectively. the results revealed that malas variety had the least strength against compression forces and it decreased (15%) with delay in harvesting of pomegranate fruit. it was shown that by increasing of fruit size, the density reduced (39%) and the mechanical strength increased (25%).
منابع مشابه
determination of some physical and mechanical properties red bean
چکیده: در این تحقیق، برخی خواص فیزیکی و مکانیکی لوبیا قرمز به-صورت تابعی از محتوی رطوبت بررسی شد. نتایج نشان داد که رطوبت بر خواص فیزیکی لوبیا قرمز شامل طول، عرض، ضخامت، قطر متوسط هندسی، قطر متوسط حسابی، سطح تصویر شده، حجم، چگالی توده، تخلخل، وزن هزار دانه و زاویه ی استقرار استاتیکی در سطح احتمال 1 درصد اثر معنی داری دارد. به طوری که با افزایش رطوبت از 54/7 به 12 درصد بر پایه خشک طول، عرض، ضخام...
15 صفحه اولEffect of Fruit Size and Maturity on Selected Mechanical Properties of Tomato
The losses in fruits and vegetables in various postharvest operations remained high in which tomato is one of the major vegetable fruit. Tomato is a sensitive vegetable whose quality is substantially reduces due to physical damage encountered by various mechanical forces in harvesting, handling and other postharvest operation. In this study an attempt was made to determine mechanical properties...
متن کاملStudy of milling effect on particle size and mechanical properties of WC-Co composite
The effect of milling on the particle size and mechanical properties Tungsten Carbide - Cobalt composite were investigated. First, raw materials ratios by mechanical milling for 4 hours at 300 rpm were mixed. The powder in the optimum temperature 1350°C at a rate of temperature rise 50°C / min and shelf life of 4 minutes and the pressure MPa 30 were sintered in SPS. The results indicated nearly...
متن کاملStudy of milling effect on particle size and mechanical properties of WC-Co composite
The effect of milling on the particle size and mechanical properties Tungsten Carbide - Cobalt composite were investigated. First, raw materials ratios by mechanical milling for 4 hours at 300 rpm were mixed. The powder in the optimum temperature 1350°C at a rate of temperature rise 50°C / min and shelf life of 4 minutes and the pressure MPa 30 were sintered in SPS. The results indicated nearly...
متن کاملeffect of seed priming and irrigation regimes on yield,yield components and quality of safflowers cultivars
این مطالعه در سال 1386-87 در آزمایشگاه و مزرعه پژوهشی دانشگاه صنعتی اصفهان به منظور تعیین مناسب ترین تیمار بذری و ارزیابی اثر پرایمینگ بر روی سه رقم گلرنگ تحت سه رژیم آبیاری انجام گرفت. برخی از مطالعات اثرات سودمند پرایمینگ بذر را بر روی گیاهان مختلف بررسی کرده اند اما در حال حاضر اطلاعات کمی در مورد خصوصیات مربوط به جوانه زنی، مراحل نموی، عملکرد و خصوصیات کمی و کیفی بذور تیمار شده ژنوتیپ های م...
منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
مهندسی بیوسیستم ایرانجلد ۴۶، شماره ۲، صفحات ۱۶۹-۱۷۴
کلمات کلیدی
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023