modal identification of a tested steel frame using linear arx model structure

this study contains the identification of modal dynamic properties of a 3-story large-scale steel test frame structure through shaking table measurements. shaking table test is carried out to estimate the modal properties of the test frame such as natural frequencies, damping ratios and mode shapes. among many different model structures, arx (auto recursive exogenous) model structure is used for modal identification of the frame structure system. the unknown parameters in the obtained arx model structure are estimated by least-square method by minimizing the aic criteria with the help of a program coded in advanced computing software matlab®. the adopted model structure is then tested out in time domain to verify the validity of the model with the selected model parameters. then the modal characteristics of test frame and the story stiffness are estimated using the white noise shakings. an attempt is done to determine the change of modal characteristics and the story stiffness of test frame according to the velocity, which the test frame structure experienced during the shaking schedule and also during the input shaking of el centro 1940 ns. results shows that there is an increase in damping ratio and a decrease in both story stiffness and natural frequency for all modes when the damage forms at cementitious device and the test frame structure itself during the shaking schedule.