hydrogen storage in carbon nanotubes with ni nanoparticles by electrochemical

Hydrogen storage in carbon nanotubes with Ni nanoparticles by electrochemical

In this paper, the electrochemical hydrogen storage in nanocomposite materials was studied. Multi-Walled Carbon Nanotubes (MWCNTs) electrode was prepared by mixing with special composite. The optimum ratio of MWCNTs was estimated 30-70% (w/w) in the composite material. MWCNTs were synthesized by Chemical vapor deposition (CVD). The nanocomposite was homogenized by microwave. Cyclic voltammetry ...

Hydrogen storage in carbon nanotubes with Ni nanoparticles by electrochemical

In this paper, the electrochemical hydrogen storage in nanocomposite materials was studied. Multi-Walled Carbon Nanotubes (MWCNTs) electrode was prepared by mixing with special composite. The optimum ratio of MWCNTs was estimated 30-70% (w/w) in the composite material. MWCNTs were synthesized by Chemical vapor deposition (CVD). The nanocomposite was homogenized by microwave. Cyclic voltammetry ...

Hydrogen storage in aligned carbon nanotubes

Aligned carbon nanotubes ~CNTs! with diameters of 50–100 nm, synthesized by plasma-assisted hot filament chemical vapor deposition, were employed for hydrogen adsorption experiments in their as-prepared and pretreated states. Quadruple mass spectroscopy and thermogravimetric analysis show a hydrogen storage capacity of 5–7 wt% was achieved reproducibly at room temperature under modest pressure ...

Mechanics of hydrogen storage in carbon nanotubes

A continuum mechanics model is established for hydrogen storage in singleand multiwall carbon nanotubes (CNTs) and the bundle of single-wall CNTs. The model accounts for the deformation of CNTs, and van der Waals interactions among hydrogen molecules and between hydrogen and carbon atoms. The analytical expressions of hydrogen storage (number of hydrogen molecules per unit volume) in CNTs are o...

Synthesis and Electrochemical Lithium Storage Behavior of Carbon Nanotubes Filled with Iron Sulfide Nanoparticles

Carbon nanotubes (CNTs) filled with iron sulfide nanoparticles (NPs) are prepared by inserting sulfur and ferrocene into the hollow core of CNTs followed by heat treatment. It is found that pyrrhotite-11T iron sulfide (Fe-S) NPs with an average size of ≈15 nm are encapsulated in the tubular cavity of the CNTs (Fe-S@CNTs), and each particle is a single crystal. When used as the anode material of...

Electrochemical Biosensing with Carbon Nanotubes