Zirconia/phenylsiloxane nano-composite for LED encapsulation with high and stable light extraction efficiency
نویسندگان
چکیده
منابع مشابه
Color Stability of a Microhybrid Resin Composite Polymerized with LED and QTH Light Curing Units
Introduction: Discoloration of resin composites is a common reason for replacement of these restorations. The aim of this study was to eva-luate the influence of different light curing de-vices on color stability of a microhybrid resin composite. Materials and Methods: 80 disc-shaped speci-mens (8 mm in diameter, 2-mm height) were fabricated from filtek Z250 resin composite. Specimens wer...
متن کاملCuring efficiency of high-intensity light-emitting diode (LED) devices.
We evaluated the curing efficiency of 4 high-intensity light-emitting diode (LED) devices by assessing percentage of residual C=C (%RDB), surface microhardness (SM), depth of cure (DC), percentage of linear shrinkage-strain (%LS), and percentage of wall-to-wall contraction (%WWC). The light-curing units tested were a QTH light, the Elipar TriLight (3M/ESPE), and 4 LED devices - the Allegro (Den...
متن کاملImprovement of photon extraction efficiency of GaN-based LED using micro and nano complex polymer structures
A micro- and nanoscale complex structure made of a high refractive index polymer (n = 2.08) was formed on the ITO electrode layer of an edge-emitting type GaN blue light-emitting diode (LED), in order to improve the photon extraction efficiency by suppressing total internal reflection of photons. The nanoimprint lithography process was used to form the micro- and nanoscale complex structures, u...
متن کاملcolor stability of a microhybrid resin composite polymerized with led and qth light curing units
introduction: discoloration of resin composites is a common reason for replacement of these restorations. the aim of this study was to eva-luate the influence of different light curing de-vices on color stability of a microhybrid resin composite. materials and methods: 80 disc-shaped speci-mens (8 mm in diameter, 2-mm height) were fabricated from filtek z250 resin composite. specimens were divid...
متن کاملTitanium oxide nanotube arrays for high light extraction efficiency of GaN-based vertical light-emitting diodes.
TiO2 nanotube (NT) arrays were fabricated on the surface of n-GaN through a liquid-phase conversion process using ZnO nanorods (NRs) as a template for high-efficiency InGaN/GaN multiple quantum well (MQW) vertical light-emitting diodes (VLEDs). The optical output power of the VLEDs with TiO2 NTs was remarkably enhanced by 23% and 189% at an injection current of 350 mA compared to those of VLEDs...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: RSC Advances
سال: 2021
ISSN: 2046-2069
DOI: 10.1039/d1ra02230j