Work done on a single-particle gas during an adiabatic compression and expansion process
نویسندگان
چکیده
منابع مشابه
Under-Compression (Over-Expansion) – An Isochoric Or Adiabatic Process?
It has long been established that for a Positive Displacement (PD) compressor or expander such as reciprocating or rotary screw type, the thermodynamic process is adiabatic when compressor or expander discharge pressure is equal to system back pressure (or 100% internal compression or expansion). At this design point, compressor or expander efficiency and noise are most desirable. But more ofte...
متن کاملApproximating the Adiabatic Expansion of a Gas
We begin by allowing a gas to occupy a well insulated vessel, where the pressure (Pinitial) is a bit higher than atmospheric pressure (Vinitial and Tinitial are known). The vessel is then opened and closed rapidly, allowing the gas to escape at an intermediate pressure equal to atmospheric pressure (Pinter). The speed with which this is done is crucial, because if there is appreciable heat loss...
متن کاملWork distribution for the adiabatic compression of a dilute and interacting classical gas.
We consider a simple, physically motivated model of a dilute classical gas of interacting particles, initially equilibrated with a heat bath, undergoing adiabatic and quasistatic compression or expansion. This provides an example of a thermodynamic process for which non-Gaussian work fluctuations can be computed exactly from microscopic principles. We find that the work performed during this pr...
متن کاملconsequence analysis of the leakage, ignition and explosion during high pressure sour gas injection process to the oil reservoir
there is no doubt that human being needs to become integrated with industry and industry needs to be progressed, daily. on the other hand, serious events in industrial units specially in oil industries has been shown that such damages and events are industry related ones. the consequence of such events and damages which resulted in chemical and poisoned explosions and loss of life and property ...
Cold work simulation of hole expansion process and its effect on crack closure
Using cold working fastener holes is a simple life enhancement procedure that strengthens metallic components by retarding crack growth around a hole. In the present paper, the residual stress field that is induced by the hole expansion process is obtained based on different material models namely elastic perfect plastic, isotropic hardening and kinematic hardening using three-dimensional finit...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Physical Review E
سال: 2019
ISSN: 2470-0045,2470-0053
DOI: 10.1103/physreve.100.042110