Wet-chemical Treatment for Improved Surface Passivation of Textured Silicon Heterojunction Solar Cells

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Origin of passivation in hole-selective transition metal oxides for crystalline silicon heterojunction solar cells

Transition metal oxides (TMOs) have recently attracted interest as an alternative to boron/phosphorous doped layers in crystalline silicon heterojunction solar cells. In this work, the interface between n-type c-Si (n-Si) and three thermally evaporated TMOs (MoO3, WO3 and V2O5) was investigated by transmission electron microscopy and secondary ion-mass/x-ray photoelectron spectroscopy. For the ...

متن کامل

Heterojunction silicon microwire solar cells.

We report radial heterojunction solar cells of amorphous silicon on crystalline silicon microwires with high surface passivation. While the shortened collection path is exploited to increase the photocurrent, proper choice of the wire radius and the highly passivated surface prevent drastic decrease in the voltage due to high surface-to-volume ratio. The heterojunction is formed by depositing a...

متن کامل

Texturing for Heterojunction Silicon Solar Cells

Heterojunction solar cells have potential for very high device voltages and currents, yet this relies on correct preparation of wafer surfaces prior to a-Si deposition. This paper investigates the preparation of wafer surfaces by NaOH texturing prior to amorphous silicon intrinsic layer deposition. It is found that with a CP etch or low temperature anneal after texturing, and with correct depos...

متن کامل

Amorphous Silicon Compound Films for Surface Passivation and Antireflection Coating of Crystalline Silicon Solar Cells

This chapter gives an overview of the theoretical bases of surface passivation and antireflection coating and describes the methods and equipment used to characterize the layers created in this work. While surface passivation is quantified by the effective surface recombination velocity Seff , this parameter cannot be measured directly. Instead, the lifetime measurements by QSSPC and ”PCD carri...

متن کامل

Rear-Sided Passivation by SiNx:H Dielectric Layer for Improved Si/PEDOT:PSS Hybrid Heterojunction Solar Cells

UNLABELLED Silicon/organic hybrid solar cells have recently attracted great attention because they combine the advantages of silicon (Si) and the organic cells. In this study, we added a patterned passivation layer of silicon nitride (SiNx:H) onto the rear surface of the Si substrate in a Si/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) ( PEDOT PSS) hybrid solar cell, enabling an im...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Energy Procedia

سال: 2014

ISSN: 1876-6102

DOI: 10.1016/j.egypro.2014.08.117