منابع مشابه
Maskless photolithography using UV LEDs.
A UV light emitting diode (LED) with a maximum output of 372 nm was collimated using a pinhole and a small plastic tube and focused using a microscope objective onto a substrate for direct lithographic patterning of the photoresist. Movement of the substrate with a motorised linear stage (syringe pump) allowed lines in SU-8 to be pattered with a width down to 35 microm at a linear velocity of 8...
متن کاملMaskless inverted pyramid texturization of silicon
We discovered a technical solution of such outstanding importance that it can trigger new approaches in silicon wet etching processing and, in particular, photovoltaic cell manufacturing. The so called inverted pyramid arrays, outperforming conventional pyramid textures and black silicon because of their superior light-trapping and structure characteristics, can currently only be achieved using...
متن کاملMaskless etching of silicon using patterned microdischarges
Microdischarges in flexible copper-polyimide structures with hole diameters of 200 mm have been used as stencil masks to pattern bare silicon in CF4/Ar chemistry. The discharges were operated at 20 Torr using the substrate as the cathode, achieving etch rates greater than 7 mm/min. Optical emission spectroscopy provides evidence of excited fluorine atoms. The etch profiles show a peculiar shape...
متن کاملLossless Compression Techniques for Maskless Lithography Data
Future lithography systems must produce more dense chips with smaller feature sizes, while maintaining the throughput of one wafer per sixty seconds per layer achieved by today’s optical lithography systems. To achieve this throughput with a direct-write maskless lithography system, using 25 nm pixels for 50 nm feature sizes, requires data rates of about 10 Tb/s. In a previous paper, we present...
متن کاملMicro-mirror Arrays for Maskless Lithography
This paper presents a design approach for fabricating an array of MEMS mirrors suitable for maskless lithography applications in a commercial CMOS process. A small footprint mirror design is presented which uses a pair of support beams for signal routing and diagonal gap-closing actuators for mirror deflection. The actuators are shown to be capable of delivering up to 10nN of force per micron o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Diagnosis
سال: 2021
ISSN: 2194-802X,2194-8011
DOI: 10.1515/dx-2020-0159