UV Degradation of Low-Density Polyethylene Solutions.
نویسندگان
چکیده
منابع مشابه
Degradation of Low Density Polyethylene Due To Successive Exposure to Acid Rain and UV Radiation
Utilization of polymer products for outdoor applications is continuously increasing. So the stability of polymers against environmental degradation became top of interests for many researchers. The effect of environmental elements on the polymers stability has been studied, but individually. A solution against an environmental element may conflict with a solution against other element. Therefor...
متن کاملPolyethylene glycol degradation by UV irradiation
Degradation or polyethylene glycol has been studi ed by UV irradiation. A drastic change in the morphology from spherulite to rhythmic pattern has been observed under polarized light microscope when exposed to UV light. Molecular weight of PEG. Rr value and melting point have been recorded after UV exposure. On UV exposure there has also been a change in UV. IR and powder X-ray diffraction patt...
متن کاملGrafting of Acrylamide to Low Density Polyethylene During Melt Processing
Acrylamide was grafted in low density polyethylene during melt processing in the presence of a free radical initiator using a torque rheometer in a closed system. Effects of processing time, acrylamide and benzoyl peroxide concentrations were studied. FTIR studies revealed that the degree of grafting increased by an increase in acrylamide concentration. Maximum grafting was obtained at 7 mi...
متن کاملCatalytic conversion of waste low density polyethylene into fuel oil
Waste Low density polyethylenes (LDPE) represent a source of energy and valuablechemicals, were pyrolysed catalytically in a batch reactor under atmospheric pressure. Calciumcarbide was used as a catalyst to explore its effect on pyrolysis product distribution. The effect oftemperature, amount of catalyst and time on the yields of the pyrolysed products wasinvestigated. The effect of catalyst o...
متن کاملStudying the Intercalation of Low Density Polyethylene/Clay Nanocomposites after Different UV Exposures
--This study attempts to understand the effect of different UV irradiation methods on the intercalation of LDPE/MMT nanocomposites, and its molecular behavior at certain isothermal crystallization temperature. Three different methods of UV exposure were employed using single composition of LDPE/MMT nanocomposites. All samples were annealed for 5 hours at a crystallization temperature of 100oC. ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: KOBUNSHI RONBUNSHU
سال: 1991
ISSN: 0386-2186,1881-5685
DOI: 10.1295/koron.48.453