Utilization of infrared measurements for cutting temperature evaluation during turning process of 42CrMo4 alloy steel
نویسندگان
چکیده
منابع مشابه
Evaluation of Flank Wear of Iron-rich Binder Carbide Cutting Tool in Turning of Titanium Alloy
Despite the fact that Titanium material has been considered as difficult to cut material, its usage has been increasing day by day in all engineering sectors; wherever criticality is encountered. Many studies are going on in view of increasing tool life at high cutting speed to improve productivity. In this study, attempt has been made to see the effect of iron as a partial substitution along ...
متن کاملEffect of Cutting Parameters on Cutting Forces and MRR During Turning Hard Alloy Steel With and Without Coolant
This paper investigates the effect of different cutting parameters (cutting speed, feed rate, and depth of cut) on cutting force components and material removal rate (MRR) in dry and wet hard turning processes. The workpiece material, hardened alloy steel AISI 52100, was machined on a CNC lathe with coated carbide tool under different settings of cutting parameters. Three cutting parameters eac...
متن کاملMulti Objective Optimization during Turning of EN24 Alloy Steel
The paper envisages the study to optimize the effects of process variables on surface roughness, MRR and power consumption of En24 of work material using PVD coated tool. In the present investigation the influence of spindle speed, feed rate, and depth of cut were studied as process parameters. The experiments have been conducted using full factorial design in the design of experiments (DOE) on...
متن کاملOptimization of Minimum Quantity Liquid Parameters in Turning for the Minimization of Cutting Zone Temperature
The use of cutting fluid in manufacturing industries has now become more problematic due to environmental pollution and health related problems of employees. Also the minimization of cutting fluid leads to the saving of lubricant cost and cleaning time of machine, tool and work-piece. The concept of minimum Quantity Lubrication (MQL) has come in to practice since a decade ago in order to overco...
متن کاملOptimization of Machining Parameters for cutting temperature on turning of Niobium alloy C-103by using RSM
Niobium based super alloys are an unusual class of metallic materials with an exceptional combination of high temperature strength, toughness, and resistance to degradation in corrosive or oxidizing environments. The focus of present work was to study the effect of cutting parameters – speed, feed and depth of cut on the machinability of Niobium C-103 under dry machining condition using respons...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Mechanik
سال: 2015
ISSN: 0025-6552
DOI: 10.17814/mechanik.2015.8-9.417