Utilization of Dual-PSA Technology for Natural Gas Upgrading and Integrated CO2 Capture

CO2 Capture from Natural Gas Combined Cycles

CO2 capture from fossil fuel power plants is increasingly proposed for greenhouse gases emission mitigation. It can be applied to coal power stations (with boiler and steam cycle or with gasification) or to natural gas combined cycles (NGCC). The first case is probably the most important in a mid-term perspective, due to: (i) the larger amount of avoided carbon per unit of electricity produced,...

Integrated CO2 Capture and Utilization Using Non-Thermal Plasmolysis

In this work, two simple processes for carbon dioxide (CO2) such as capture and utilization have been combined to form a whole systems approach to carbon capture and utilization (CCU). The first stage utilizes a pressure swing adsorption (PSA) system, which offers many benefits over current amine technologies. It was found that high selectivity can be achieved with rapid adsorption/desorption t...

Two novel oxy-fuel power cycles integrated with natural gas reforming and CO2 capture

Two novel system configurations were proposed for oxy-fuel natural gas turbine systems with integrated steam reforming and CO2 capture and separation. The steam reforming heat is obtained from the available turbine exhaust heat, and the produced syngas is used as fuel with oxygen as the oxidizer. Internal combustion is used, which allows a very high heat input temperature. Moreover, the turbine...

Investigation of CO2 and H2O Addition to Natural Gas for Production of Synthesis Gas

General modeling and optimization of syngas production via noncatalytic autothermal partial oxidation of methane are carried out using our developed scientific software which was based on the minimization of total Gibbs energy. In this work, a novel application of the direct search and Newton-Raphson methods was introduced to apply to optimization of a complex chemical reaction. Sensitivity ana...

Development of a Pressure Swing Adsorption (PSA) Process for CO2 Capture from Flue Gas