منابع مشابه
Modeling soot formation in turbulent kerosene/air jet diffusion flames
Soot volume fraction and number density in a turbulent diffusion flame burning kerosene/air were predicted using two approaches. The first used a conventional soot inception model based on the acetylene concentration and is referred to as the acetylene model. The second used a soot inception model based on the formation rate of three and two ring aromatics [1] and is referred to as the PAH ince...
متن کاملLES modeling for lifted turbulent jet flames
The LES method is an attractive approach for the simulation of turbulent jet flames. In this method, the effects of large scale structures controlling the mixing process are resolved while small-scale effects such as the leading-edge flames involved in the flame base dynamics are accounted for by the subgrid-scale models. The LES approach is examined in this study with a particular emphasis on ...
متن کاملUnsteady Flamelet Modeling of Differential Diffusion in Turbulent Jet Diffusion Flames
An unsteady flamelet model, which will be called the Lagrangian Flamelet Model, has been applied to a steady, turbulent CH4/H2/N2–air diffusion flame. The results have been shown to be in reasonable agreement with experimental data for axial velocity, mixture fraction, species mass fractions, and temperature. The application of three different chemical mechanisms leads to the promising conclusi...
متن کاملCharacteristics of Turbulent Nonpremixed Jet-flames and Jet-flames in Crossflow in Normal- and Low-gravity
It is well known that buoyancy has a major influence on the flow structure of turbulent nonpremixed jet flames. For example, previous studies have shown that transitional and turbulent jet flames exhibit flame lengths that are as much as a factor of two longer in microgravity than in normal gravity. The objective of this study is to extend these previous studies by investigating both mean and f...
متن کاملIgnition in 40 kW co-axial turbulent diffusion oxy-coal jet flames
This paper is directed towards understanding how composition of the coal transport medium (primary CO2 and O2) affects the observed ignition stand-off distance in 40 kW co-axial turbulent diffusion, oxy-coal flames, supported in a specially designed combustion test rig, rated at 100 kW. First, a methodology to define and quantify the observed ignition stand-off distance in laboratory combustor ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society for Aeronautical and Space Sciences
سال: 1978
ISSN: 0021-4663
DOI: 10.2322/jjsass1969.26.510