Tribocorrosion behavior of Nb coating deposited by double-glow plasma alloying
نویسندگان
چکیده
منابع مشابه
Tribocorrosion Failure Mechanism of TiN/SiOx Duplex Coating Deposited on AISI304 Stainless Steel
TiN/SiOx duplex coatings were synthesized on AISI304 stainless steel by plasma immersion ion implantation and deposition (PIIID) followed by radio frequency magnetron sputtering (RFMS). The microstructure and tribocorrosion failure behaviors of the duplex coatings were investigated by X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, atomic force microscopy, rec...
متن کاملOleophobic optical coating deposited by magnetron PVD
Thin oxinitride films of Zn-Sn-O-N and Si-Al-O-N were deposited on glass by reactive magnetron sputtering at various nitrogen-to-oxygen ratios. Nitrogen added to oxygen led to decrease of the surface roughness and increase of oleophobic properties studied by the oil-drop test. The best oleophobity was obtained for Zn-Sn-O-N oxinitride at Zn:Sn=1:1 and N:O=1:2. Improved oleophobic properties wer...
متن کاملDouble Langmuir probe measurement of plasma parameters in a dc glow discharge
In this paper, plasma main characteristics such as electron mean temperature, electron number density, and oscillation frequency have been measured experimentally using the double Langmuir probe diagnostic system. In our experiment, the plasma was generated by applying the low pressure dc glow discharge in several common gases. The experimental results indicated the highest plasma density and o...
متن کاملNanocrystalline Hydroxyapatite/Si Coating by Mechanical Alloying Technique
A novel approach for depositing hydroxyapatite (HA) films on titanium substrates by using mechanical alloying (MA) technique has been developed. However, it was shown that one-hour heat treatment at 800°C of such mechanically coated HA layer leads to partial transformation of desired HA phase to beta-tri-calcium phosphate (β-TCP) phase. It appears that the grain boundary and interface defects f...
متن کاملRoles of Alloying Elements on the Corrosion Behavior of Sputter-deposited Amorphous
Ternary amorphous W–xCr–yZr alloys containing 9−38 at % tungsten, 15−42 at % chromium and 39−73 at % zirconium were successfully prepared by direct current (DC) magnetron sputtering technique. The corrosion rates of all the examined sputter−deposited W–xCr–yZr alloys were in the range of 1 × 10−3 mm/y or lower which are nearly one order of magnitude lower than those of the sputter−deposited tun...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Research Express
سال: 2021
ISSN: 2053-1591
DOI: 10.1088/2053-1591/abdc39