Transition of Deformation Mechanism with Grain Refinement in Interstitial-Free Steel
نویسندگان
چکیده
منابع مشابه
The Effect of Hot Deformation Parameters on Grain Size Refinement in a Martensitic Stainless Steel
The grain size refinement of AISI 422 martensitic stainless steel in the temperature range of 950-1150 ºC was investigated by hot deformation tests. The deformed specimens were held at deformation temperature with delay times of 5 to 300s after achieving a strain of 0.3. The austenite grains exhibit a considerable growth at temperature higher than 1050˚C, while the grain coarsening is negligibl...
متن کاملThe Distribution of Grain Boundary Planes in Interstitial Free Steel
The grain boundary character distribution in a commercial IF steel has been measured as a function of lattice misorientation and boundary plane orientation. The grain boundary plane distribution revealed a relatively low anisotropy with a tendency for grain boundaries to terminate on low index planes having relatively low surface energy and large interplanar spacings. Although the most common g...
متن کاملGrain Refinement of Dual Phase Steel via Tempering of Cold-Rolled Martensite
A microstructure consisting of ultrafine grained (UFG) ferrite with average grain size of ~ 0.7 µm and dispersed nano-sized carbides was produced by cold-rolling and tempering of the martensite starting microstructure in a low carbon steel. Subsequently, fine grained dual phase (DP) steel consisting of equiaxed ferrite grains with average size of ~ 5 µm and martensite islands with average size ...
متن کاملCutting Mechanism of Sulfurized Free-Machining Steel
In order to improve efficiency of cutting process in production industry, development of new steel which has good machinablity is desired. The work material which has good surface roughness, easy breakable chip and small tool wear as the good machinablity is expected. And the free-machining steel was developed owning to adding elements which could make the machinablity better. Of all others, le...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 2014
ISSN: 0915-1559,1347-5460
DOI: 10.2355/isijinternational.54.1729