Transient vibrations of a fractional Zener viscoelastic cantilever beam with a tip mass
نویسندگان
چکیده
Abstract The presented work concerns the kinematically excited transient vibrations of a cantilever beam with mass element fixed to its free end. Euler–Bernoulli theory and fractional Zener model material are assumed. A Caputo derivative is used formulate viscoelastic law. characteristic equation, modal frequencies, eigenfunction orthogonality conditions achieved for considered. equations motion system solved numerically. numerical solution multi-term differential equation obtained by means conversion mixed ordinary equations, each order $$0 < \gamma \le 1$$ 0 < ? ? 1 . time histories during passage through resonance calculated. comparison between responses an integer presented. calculations performed reveal that use damping affects on system. calculated show some values $$\gamma$$ , amplitudes occurring in area second greater than those first resonance, which does not occur case derivative. Moreover, evaluation made difference results using Kelvin model. It shown physical parameters, calculation both models virtually same models, simpler, Kelvin–Voigt can be instead This simplifies decreases needed make calculations.
منابع مشابه
A Survey on Buckling and Vibrations of a Viscoelastic Beam under Distributed Lateral and Axial Loads
In this paper, based on Kelvin and Linear Standard Solid models, dynamic response and the buckling load of a viscoelastic beam under lateral and axial loads have been determined. The governing equations have been extracted using Euler and Timoshenko theories and their analytical solutions have been obtained by using the eigenfunctions expansion method. Buckling load have been calculated by us...
متن کاملNonlinear Vibration Analysis of a cantilever beam with nonlinear geometry
Analyzing the nonlinear vibration of beams is one of the important issues in structural engineering. According to this, an impressive analytical method which is called Modified Iteration Perturbation Method (MIPM) is used to obtain the behavior and frequency of a cantilever beam with geometric nonlinear. This new method is combined by the Mickens and Iteration methods. Moreover, this method don...
متن کاملPull-In Instability and Vibrations of a Beam Micro-Gyroscope
Gyroscopes are used as rotation rate sensors. Conventional gyroscopes are heavy and bulky, which creates important problems regarding their usage in different applications. Micro-gyroscopes have solved these problems due to their small size. The beam micro-gyroscope is one of the popular types of inertial sensors. Their small dimensions and low energy consumption are key reasons for their popul...
متن کاملNeurocontrol of a Cantilever Beam
The civil engineering community is currently moving towards the continuous monitoring of civil structures in order to forecast their unavoidable failure with enough precision. So-called smart technologies seem to be well adapted to this specific task. For a civil structure, such as a bridge or a dam, a monitoring smart system often includes a set of sensors, whose data is passed onto a controll...
متن کاملnonlinear vibration analysis of a cantilever beam with nonlinear geometry
analyzing the nonlinear vibration of beams is one of the important issues in structural engineering. according to this, an impressive analytical method which is called modified iteration perturbation method (mipm) is used to obtain the behavior and frequency of a cantilever beam with geometric nonlinear. this new method is combined by the mickens and iteration methods. moreover, this method don...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Meccanica
سال: 2021
ISSN: ['1572-9648', '0025-6455']
DOI: https://doi.org/10.1007/s11012-021-01365-9