Transient Liquid Phase Bonding of Titanium Aluminide Alloys – A Microstructural Investigation
نویسندگان
چکیده
منابع مشابه
Development of Oxidation Protection Coatings for Gamma Titanium Aluminide Alloys
Metallic material systems play a key role in meeting the stringent weight and durability requirements for reusable launch vehicle (RLV) airframe hot structures. Gamma titanium aluminides (γTiAl) have been identified as high-payoff materials for high-temperature applications. The low density and good elevated temperature mechanical properties of γ-TiAl alloys make them attractive candidates for ...
متن کاملTransient liquid phase bonding of AISI 304L stainless steels with the austenitic and martensitic microstructures
In the present study, the effect of time and base metal microstructure on the Transient Liquid Phase (TLP) bonding of 304L stainless steel was studied. TLP was performed at 1050 0C for 5 and 60 minutes on the coarse grain austenitic and martensitic microstructure using BNi-2 interlayer. To prepare martensitic microstructure, as-received 304L was rolled at -15 0C up to 80% rolling reduction. TEM...
متن کاملTransient liquid phase bonding of AISI 304L stainless steels with the austenitic and martensitic microstructures
In the present study, the effect of time and base metal microstructure on the Transient Liquid Phase (TLP) bonding of 304L stainless steel was studied. TLP was performed at 1050 0C for 5 and 60 minutes on the coarse grain austenitic and martensitic microstructure using BNi-2 interlayer. To prepare martensitic microstructure, as-received 304L was rolled at -15 0C up to 80% rolling reduction. TEM...
متن کاملLow Temperature Transient Liquid Phase Bonding of Ti-6AI-4V
Transient liquid phase bonds can be made at low temperatures in vacuum using zinc inderlayers. The resulting microstructure is interface free with no detection of zinc by X-ray flourenscence, after 4 hours at 800°C The mechanical properties of the joint are at least one third of the parent metal. The process relies on evaporation, diffusion and intermetallic reaction of the zinc with the titan...
متن کاملShock response of a gamma titanium aluminide
Potential use of -TiAl alloys in aerospace and other structural applications require knowledge of their impact behavior for better evaluation and modeling. In the present study plate impact experiments are conducted using a single-stage gas gun to better understand the shock behavior of the recently developed class of gamma titanium aluminide alloys—the Gamma-Met PX. The Gamma-Met PX showed sup...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Microscopy and Microanalysis
سال: 2002
ISSN: 1431-9276,1435-8115
DOI: 10.1017/s1431927602105046