Toz Metalurjisi Yöntemiyle Üretilen B4C+TiB2 Takviyeli Al 2024 Esaslı Kompozitlerde Takviye Miktarının Mekanik Özelliklere Etkisi
نویسندگان
چکیده
منابع مشابه
Toz Metalurji̇si̇ Yöntemi̇ İle Alümi̇nyum Köpük Üreti̇mi̇ Procuction of Al Foams by Powder Metallurgy Route
In this study pure Al and pre-alloyed Al alloy powders (Alumix 231Al-Cu %2.5-Mg %0.5–Si %14) with or without reinforcing elements were used to produce classical Al foam or spherical Al foam with various production parameters by using powder metallurgy route and the results obtained have been discussed. Al2O3 and SiC particles were used as reinforcing elements and TiH2 powders were used as foami...
متن کاملConsolidation of Al-2024 Powder by Conventional P/M Route and ECAP – A Comparative Study
In this study, mechanically alloyed Al 2024 powder is densified by conventional sintering and by equal channel angular pressing (ECAP) with and without back pressure. The powder was encapsulated in an aluminium can for consolidation through ECAP. The properties obtained in the compacts by conventional sintering route and by ECAP are compared. The effect of conventional sintering and ECAP on con...
متن کاملVPPA welds of Al-2024 alloys: analysis and modelling of local microstructure and strength
The microstructural features of variable polarity plasma arc welded Al-Cu-Mg 2024-T351 with 2319 filler have been studied by TEM, SEM and DSC. Fusion zone, partial melting zone, resolutionising zone, overageing (for S phase), peak ageing (for S phase) and under ageing zones (for S phase) have been identified. The Ω phase has been observed between re-solutionising zone and peak ageing zone. The ...
متن کاملThe Effect Of Cooling Rate On Cyclic Stress Strain Response Of Al-2024
Cyclic stress strain curves (CSSC) response of Al-2024 Annealed condition was conducted under symmetric tension-compression at room temperature and constant frequency, using a servo-hydraulic testing machine, to study the effect of cooling rate on cyclic stress strain curves (CSSC) response. The fatigue response of Al-2024 alloy was evaluated macroscopically in terms of cyclic stress strain res...
متن کاملLaser Direct Metal Deposition of 2024 Al Alloy: Trace Geometry Prediction via Machine Learning
Laser direct metal deposition is an advanced additive manufacturing technology suitably applicable in maintenance, repair, and overhaul of high-cost products, allowing for minimal distortion of the workpiece, reduced heat affected zones, and superior surface quality. Special interest is growing for the repair and coating of 2024 aluminum alloy parts, extensively utilized for a wide range of app...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Uluslararası Muhendislik Arastirma ve Gelistirme Dergisi
سال: 2019
ISSN: 1308-5514
DOI: 10.29137/umagd.407488