Toward architecturing of metal composites by twist extrusion

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Simulation of a New Process Design to Fabricate a Rectangular Twist Waveguide Using Extrusion and a Twist Die

The aim of the present study is to determine the feasibility of making a rectangular twist waveguide used to rotate electromagnetic waves. For this purpose, the process of fabricating an aluminum rectangular twist waveguide was simulated by making use of finite element method and Deform software. The optimum length and angle of the twist die for manufacturing a twist waveguide with inner cross ...

متن کامل

Kinematics of metal flow during twist extrusion investigated with a new experimental method

We propose an experimental method for investigating the kinematics of metal flow in twist extrusion (TE). The method is based on a theoretical model of the velocity field. The parameters of this model are determined to satisfy the observed flow-line for characteristic points of the specimen. The model incorporates two physical constraints: (1) metal flow is limited by the surface of the die; (2...

متن کامل

Toward superlensing with metal-dielectric composites and multilayers

We report on the fabrication of two types of adjustable, near-field superlens designs: metal–dielectric composites and metal–dielectric multilayer films. We fabricated a variety of films with different materials, thicknesses and compositions. These samples were characterized physically and optically to determine their film composition, quality, and optical responses. Our results on metal–dielec...

متن کامل

Comparative Analysis of Two Twist-Based SPD Processes: Elliptical Cross-Section Spiral Equal-Channel Extrusion vs. Twist Extrusion

The present paper deals with numerical comparison of two twist-based severe plastic deformation processes: (i) the elliptical cross-section spiral equal-channel extrusion (ECSEE) proposed recently as a novel process and (ii) the classical twist extrusion (TE). ECSEE was developed in attempt to process cylindrical work pieces and to generate more uniform strain distribution compared to classical...

متن کامل

Damage accumulation and mechanical properties of particle-reinforced metal–matrix composites during hydrostatic extrusion

The effects of hydrostatic extrusion on particle cracking and on the subsequent tensile properties of some prototypical particlereinforced metal–matrix composites are investigated. In most cases, tensile failure occurs through a plastic instability in accordance with the Considere criterion for necking. The corresponding failure strain is therefore dictated by the global flow and hardening char...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Materials Research Letters

سال: 2015

ISSN: 2166-3831

DOI: 10.1080/21663831.2015.1034812