Torsional or Rotating Bending Fatigue of Round-Bar Specimens with a Shallow Spherical Pit
نویسندگان
چکیده
منابع مشابه
Assessment of different methods for fatigue life prediction of steel in rotating bending and axial loading
Generally, fatigue failure in an element happens at the notch on a surface where the stress level rises because of the stress concentration effect. The present paper investigates the effect of a notch on the fatigue life of the HSLA100 (high strength low alloy) steel which is widely applicable in the marine industry. Tensile test was conducted on specimens and mechanical properties were obtain...
متن کاملassessment of different methods for fatigue life prediction of steel in rotating bending and axial loading
generally, fatigue failure in an element happens at the notch on a surface where the stress level rises because of the stress concentration effect. the present paper investigates the effect of a notch on the fatigue life of the hsla100 (high strength low alloy) steel which is widely applicable in the marine industry. tensile test was conducted on specimens and mechanical properties were obtain...
متن کاملA Stress Analysis of Bending Fatigue Specimens Using the Finite Element Method
A numerical analysis of stresses generated in bending fatigue specimens has been performed employing the commercially available FEM-program ADINA. The results show that transverse bending occurs, giving rise to a stress enhancement in the edge region. A stress maximum is obtained approximately 2 mm away from the specimen edge. This result is consistent with the fact that fatigue initiation pred...
متن کاملThermomechanical Buckling of Simply Supported Shallow FGM Spherical Shells with Temperature dependent Material
The thermomechanical buckling of simply supported thin shallow spherical shells made of functionally graded material is presented in this paper. A metal-ceramic functionally graded shell with a power law distribution for volume fraction is considered, where its properties vary gradually through the shell thickness direction from pure metal on the inner surface to pure ceramic on the outer surfa...
متن کاملAnalysis of Thin-Walled Structures Using Torsional-Bending Elements
In this paper a new element for analysis of thin-walled structures is presented, and the effects of secondary shear stresses on longitudinal displacements are examined. Since the Interpolation Functions are based on non-uniform torsional differential equations, the analysis of stiffness matrix is facilitated. Therefore, its ability to produce accurate results with the least number of elements i...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Japan Society of Mechanical Engineers
سال: 1977
ISSN: 0029-0270,2185-9485
DOI: 10.1299/kikai1938.43.1