Tooth contact analysis of spur gears. Part 1-SAM analysis of standard gears
نویسندگان
چکیده
منابع مشابه
A Comparative Study of Tooth Wear, Mechanical Power Losses and Efficiency in Normal and High Contact Ratio Asymmetric Spur Gears
The surface tooth wear which occurs at the gear contact region due to inadequate contact strength of the tooth is one of the predominant modes of gear failures. Currently, higher contact ratio spur gears are increasingly used in power transmission applications such as aircraft, wind turbine, automobiles and compact tracked vehicles due to their high load carrying capacity. In this work, the di...
متن کاملInfluence of Addendum Modification Factor on Root Stresses in Normal Contact Ratio Asymmetric Spur Gears
Tooth root crack is considered as one of the crucial causes of failure in the gearing system and it occurs at the tooth root due to an excessive bending stress developed in the root region. The modern power transmission gear drives demand high bending load capacity, increased contact load capacity, low weight, reduced noise and longer life. These subsequent conditions are satisfied by the aid o...
متن کاملCutting Kinematics Analysis in Hypocycloidal Tooth Milling of Cylindrical Gears
The hypocycloidal flanks of the cylindrical gear teeth have the flank lines defined by lengthened or shortened hypocycloid and the profile involute. The curved and bulged flanks have some advantages, among them being the increased strength in bending and controlled positioning of the contact imprint. The tooth flank generation has on the basis the application of the technological process of mil...
متن کاملModal Analysis of Cylindrical Gears with Arcuate Tooth Trace
In this paper, the forming principle, meshing features and tooth surface equation were introduced. And the modal parameters distribution of cylindrical gears with arcuate tooth trace was researched. The results show: 1. The modulus was the biggest impact factor for modal and natural frequency of cylindrical gears with arcuate tooth trace, then tooth width, and the radius of tooth line have the ...
متن کاملGeometry Definition and Contact Analysis of Spherical Involute Straight Bevel Gears
A practical application of the spherical involute surface to the forged straight bevel gears is provided and demonstrated in this work. Conjugate (pure involute) theoretical surfaces are developed from the input design parameters. The surfaces are modified to suit the actual application (automotive differential). The unloaded (or low load) tooth contact analysis of modified surfaces is performe...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATEC Web of Conferences
سال: 2017
ISSN: 2261-236X
DOI: 10.1051/matecconf/201711207015