Thermoelectric topping cycles with scalable design and temperature dependent material properties
نویسندگان
چکیده
منابع مشابه
Stress Redistribution Analysis of Piezomagnetic Rotating Thick-Walled Cylinder with Temperature-and Moisture-Dependent Material Properties
In this article, the problem of time-dependent stress redistribution of a piezomagnetic rotating thick-walled cylinder under an axisymmetric hygro-thermo-magneto-electro-mechanical loading is analyzed analytically for the condition of plane strain. Using the constitutive equations, a differential equation is found in which there are creep strains. Primarily, eliminating creep strains, an analyt...
متن کاملElectrical conductance between conductors with dissimilar temperature-dependent material properties
The method of Greenwood and Williamson is extended to give a general solution for the coupled nonlinear problem of steady-state electrical and thermal conduction across an interface between two conductors of dissimilar materials, for both of which the electrical resistivity and thermal conductivity are functions of temperature. The method presented is sufficiently general to cover all combinati...
متن کاملOptimization of thermoelectric topping combined steam turbine cycles for energy economy
A mismatch between the fuel combustion temperature 2250 K (adiabatic) and the high pressure steam temperature up to 900 K, results in a large amount of thermodynamic losses in steam turbine (ST) cycles. A solid-state thermoelectric (TE) placed on top of a ST cycle will produce additional electrical power. By selecting the right materials for the TE generator for high temperature operation, the ...
متن کاملPerformance, Thermal Stability and Optimum Design Analyses of Rectangular Fin with Temperature-Dependent Thermal Properties and Internal Heat Generation
In this study, we analysed the thermal performance, thermal stability and optimum design analyses of a longitudinal, rectangular fin with temperature-dependent, thermal properties and internal heat generation under multi-boiling heat transfer using Haar wavelet collocation method. The effects of the key and controlling parameters on the thermal performance of the fin are investigated. The therm...
متن کاملPerformance of Segmented Thermoelectric Cooler Micro-Elements with Different Geometric Shapes and Temperature-Dependent Properties
In this work, the influences of the Thomson effect and the geometry of the p-type segmented leg on the performance of a segmented thermoelectric microcooler (STEMC) were examined. The effects of geometry and the material configuration of the p-type segmented leg on the cooling power (Qc) and coefficient of performance (COP) were investigated. The influence of the cross-sectional area ratio of t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Scripta Materialia
سال: 2016
ISSN: 1359-6462
DOI: 10.1016/j.scriptamat.2015.05.037