Thermal Spray Diagnostics -Particle Temperature/Velocity and Coating stress in-situ Measurement

Numerical (CFD) Analysis of Thermal Spray Coating Process

A method for in situ measurement of the elastic behavior of a columnar thermal barrier coating

The mechanical behavior of a ceramic coating and the evolution of this behavior in-service play crucial roles in governing the performance and lifetime of these materials. A protocol is presented that allows for characterization of the in-plane elastic modulus and strain to failure of fragile ceramic coatings. The protocol employs digital image correlation (DIC) to measure time-resolved, full-f...

Measurement method for in situ particle settling velocity

The most meaningful parameter to determine the treatment efficiency of large scale sedimentation tanks is the settling velocity of suspended solids. However it is difficult to measured representative settling velocity because of the instability of suspended solids. A water elutriation system was tested to assess the treatment efficiency of sedimentation tanks. In laboratory tests the flow condi...

Optimal Trajectory Planning for Spray Coating

Thermal Spray Coatings

THERMAL SPRAY is a generic term for a group of processes in which metallic, ceramic, cermet, and some polymeric materials in the form of powder, wire, or rod are fed to a torch or gun with which they are heated to near or somewhat above their melting point. The resulting molten or nearly molten droplets of material are accelerated in a gas stream and projected against the surface to be coated (...