Thermal Performances Prediction Analysis of High Speed Feed Shaft Bearings Under Actual Working Condition
نویسندگان
چکیده
منابع مشابه
Thermohydrodynamic Characteristics of Journal Bearings Running under Turbulent Condition
A thermohydrodynamic (THD) analysis of turbulent flow in journal bearings is presented based on the computational fluid dynamic (CFD) techniques. The bearing has infinite length and operates under incompressible and steady conditions. In this analysis, the numerical solution of Navier-Stokes equations with the equations governing the kinetic energy of turbulence and the dissipation rate, couple...
متن کاملCryogenic Tribology in High-Speed Bearings and Shaft Seals of Rocket Turbopumps
In recent years, as a rule, improvement of the reliability of liquid propellant rockets becomes an international technical problem for built-up of safe space transport systems. The high performance, liquid propellant rocket engines require high-pressured turbopumps to deliver extremely low temperature propellants of liquid oxygen (LO2, boiling point 90 K) and liquid hydrogen (LH2, boiling point...
متن کاملStudy of Micro-High Speed Bearings and
Micromachine gas turbines require extremely high rotor speed to realize the same impeller tip speed to the large gas turbines, by very small diameter of the impellers. Hence, the rotordynamics is one of the critical issues. Especially, the bearing speed will exceed the range of experience in any existing turbomachines, and hence the method to achieve the stable operation at the required design ...
متن کاملMulti-Fault Detection of Rolling Element Bearings under Harsh Working Condition Using IMF-Based Adaptive Envelope Order Analysis
When operating under harsh condition (e.g., time-varying speed and load, large shocks), the vibration signals of rolling element bearings are always manifested as low signal noise ratio, non-stationary statistical parameters, which cause difficulties for current diagnostic methods. As such, an IMF-based adaptive envelope order analysis (IMF-AEOA) is proposed for bearing fault detection under su...
متن کاملMultiaxial Fatigue Analysis in a High-speed Microgenerator Rotor Shaft
Fatigue evaluation is one of the most concerning issue in the design of mechanical parts subject to alternative forces. Fatigue life estimation is more complicated when loads act on different axes. This paper shows the stress analysis result of the steel shaft of a high-speed microgenerator rotor with 47750 rpm and 100kW which has been carried out with analytical stress formulation. The shaft i...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Access
سال: 2019
ISSN: 2169-3536
DOI: 10.1109/access.2019.2953931