Thermal Insulation Performance and Reliability of the “Structure-Insulation” Integrated Wall Panel (SIW) for Storage Grain Bungalows
نویسندگان
چکیده
The traditional brick bungalow is not conducive to long-term grain storage because of its poor thermal insulation. In this paper, a new type wall element for bungalows with both load-carrying and insulation functions, called “Structure-Insulation” integrated panel (SIW), proposed improving the environment. To study reliability SIW under multivariable randomness availability different zones, finite model was established based on test. Then, failure criterion heat transfer coefficient as key point 1,000,000 sampling calculations were carried out by Monte Carlo method. discussed sensitivity random parameters quantified. performance test shows that coefficients two designed panels compared are reduced 45.81% 56.13%, respectively. thickness sensitive mostly performance, correlation 0.877. When 80, 94, 107 mm, can meet limit requirements granary enclosure structure 0.59, 0.53, 0.46 W/m2·K, indexes 3.08, 1.82, 1.75, research results provide an important reference design, optimization, application in
منابع مشابه
Argon: Performance Insulation for Shared Storage Servers
Services that share a storage system should realize the same efficiency, within their share of time, as when they have the system to themselves. The Argon storage server explicitly manages its resources to bound the inefficiency arising from inter-service disk and cache interference in traditional systems. The goal is to provide each service with at least a configured fraction (e.g., 0.9) of th...
متن کاملDevelopment of Straw Insulation Board : Fabrication Methods , Structure , Thermal Performance
Insulation board is being fabricated and tested for use in developing countries. It is made at a low density, in the area of 5 to 10 pounds per cubic foot (80 to 160 kilograms per cubic meter), and has good thermal properties for an air based insulation, meaning R3 to R4 per inch (Btuin/hr-ft2-oF)-, or a conductivity of .048 to .036 W/m-K. The initial effort is to produce a straw insulation boa...
متن کاملNUMERICAL TECHNIQUES FOR DIFFERENT THERMAL INSULATION MATERIALS
The objective of this work is to predict the temperature of the different types of walls which are Ferro cement wall, reinforced cement concrete (RCC) wall and two types of cavity walls (combined RCC with Ferrocement and combined two Ferro cement walls) with the help of mathematical modeling. The property of low thermal transmission of small air gap between the constituents of combine materials...
متن کاملImproving storage bandwidth guarantees with performance insulation
Workloads that share a storage system should achieve predictable, controllable performance despite the activities of other workloads. One desirable way of expressing performance goals is as bandwidth guarantees. Unfortunately, storage bandwidth is difficult to allocate and manage among workloads, because total system capacity depends on both the workloads’ access patterns and on any interferenc...
متن کاملThe roles of thermal insulation and heat storage in the energy performance of the wall materials: a simulation study.
A high-performance envelope is the prerequisite and foundation to a zero energy building. The thermal conductivity and volumetric heat capacity of a wall are two thermophysical properties that strongly influence the energy performance. Although many case studies have been performed, the results failed to give a big picture of the roles of these properties in the energy performance of an active ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Buildings
سال: 2022
ISSN: ['2075-5309']
DOI: https://doi.org/10.3390/buildings12091306