Thermal Changes of Photoresist Characteristics
نویسندگان
چکیده
منابع مشابه
SU8 nanocomposite photoresist with enhanced thermal conductivity
Composites with nanoparticles and polymers can improve the functionalities and existing formulations. In this work we synthesized Graphene Oxide and is incorporated into an epoxy based negative tone photoresist in different weight percentages. Thermal conductivity studies were carried out on those composites and it was found that 13 % by weight is the optimized loading to have an enhanced therm...
متن کاملPattern Photoresist Silicon Silicon Nitride Silicon Photoresist Silicon Nitride Silicon Etch Nitride Remove Photoresist
In this proposal we seek to establish a porous silicon based etching process in the WTC microfabrication laboratory. The new process will allow us to etch high aspect ratio holes through a wafer. Holes like these are important for decreasing the dead volume of connections between micro and macro systems and for increasing the complexity of micro-fluidic systems. At the present time, the minimum...
متن کاملsuppression of coke formation in thermal cracking by coke inhibitors
the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...
15 صفحه اولSoftbake of Photoresist Films
After coating, the resist film contains a remaining solvent concentration depending on the resist, the solvent, the resist film thickness and the resist coating technique. The softbake reduces the remaining solvent content in order to: avoid mask contamination and/or sticking to the mask, prevent popping or foaming of the resist by N2 created during exposure, improve resist adhesion to the subs...
متن کاملScanning thermal lithography: Maskless, submicron thermochemical patterning of photoresist by ultracompliant probes
This article introduces a scanning probe lithography technique in which ultracompliant thermal probes are used in the selective thermochemical patterning of commercially available photoresist. The micromachined single-probe and multiprobe arrays include a thin-film metal resistive heater and sensor sandwiched between two layers of polyimide. The low spring constant s,0.1 N/md and high thermal i...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Photopolymer Science and Technology
سال: 1999
ISSN: 0914-9244,1349-6336
DOI: 10.2494/photopolymer.12.383