Thermal Barrier Coatings (TBCs) Produced by Air Plasma Spray: Repair by Grinding and Waterjet (WJ) Processes
نویسندگان
چکیده
TBCs (Thermal Barrier Coatings) are multilayer structures usually consisting of a ceramic layer, known as top coat, arranged on connecting bond which, in turn, is above the substrate to protect. These applied hot section parts gas turbine engines for providing thermal protection. During component life, some oxidation end/or wear phenomena can occur, therefore TBC generally removed and then reapplied. To simplify manufacturing process making it more cost effectiveness, aim this work study possibility repair system by removing only damaged layer using non-conventional processes analyzing detail morphological roughness ensure good adhesion between layers.
منابع مشابه
Novel Thermal Barrier Coatings Produced by Axial Suspension Plasma Spray
Ceramic Thermal Barrier Coatings (TBCs) on superalloy components are being used successfully in land-based gas turbine and aircraft engines. These coatings are generally made by either air plasma spraying (APS) or electron beam physical vapour deposition (EB-PVD). In general, EB-PVD TBCs have superior durability due to the columnar structure, but they are very expensive compared to APS TBCs. EB...
متن کاملPhosphor-Doped Thermal Barrier Coatings Deposited by Air Plasma Spray for In-Depth Temperature Sensing
Yttria-stabilized zirconia (YSZ)-based thermal barrier coating (TBC) has been integrated with thermographic phosphors through air plasma spray (APS) for in-depth; non-contact temperature sensing. This coating consisted of a thin layer of Dy-doped YSZ (about 40 µm) on the bottom and a regular YSZ layer with a thickness up to 300 µm on top. A measurement system has been established; which include...
متن کاملTHE EFFECTS OF PLASMA SPRAY PARAMETERS ON THE MICROSTRUCTURE AND PHASE COMPOSITION OF THERMAL BARRIER COATINGS MADE BY SPPS PROCESS
In this paper the effect of plasma spray parameters, atomizing gas and substrate preheat temperature on microstructure and phase composition of YSZ coatings produced by SPPS process have been investigated. The experimental results showed that increasing the power of plasma, using hydrogen as the precursor atomizing gas and increasing substrate preheat temperature decrease the amount of non-pyro...
متن کاملStudy and Performance Evaluation of Thermal Barrier Coatings (TBCs) Using Infrared Thermography
Thermal barrier coatings (TBCs) are used in gas turbine engines to protect engine hot-section components in the harsh combustion environments, and extend component lifetimes. Infrared Thermography method has been selected for obtaining thermal images and studying the TBCs of Alumina, Zirconia and Alumina+Titanium oxide coated on the base plate of Titanium, by measuring the back wall temperature...
متن کاملThermal Spray Coatings
THERMAL SPRAY is a generic term for a group of processes in which metallic, ceramic, cermet, and some polymeric materials in the form of powder, wire, or rod are fed to a torch or gun with which they are heated to near or somewhat above their melting point. The resulting molten or nearly molten droplets of material are accelerated in a gas stream and projected against the surface to be coated (...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Key Engineering Materials
سال: 2022
ISSN: ['1662-9809', '1013-9826', '1662-9795']
DOI: https://doi.org/10.4028/p-84e1pv