The physio-mechanical properties of recycled low density polyethylene (RLDPE)/bean pod ash particulate composites
نویسندگان
چکیده
منابع مشابه
Dynamic Mechanical Analysis of Compatibilizer Effect on the Mechanical Properties of Wood Flour-High-Density Polyethylene Composites
In this study, effect of MAPE (maleic anhydride polyethylene) as the compatibilizer on the mechanical properties of wood-flour polyethylene composites has been investigated by using Dynamic Mechanical Analysis (DMA). Composites were made at 25% and 50% by weight fiber contents and 1% and 2% compatibilizer respectively. Controls were also made at the same fiber contents without the compatibilize...
متن کاملFlat-pressed wood plastic composites from sawdust and recycled polyethylene terephthalate (PET): physical and mechanical properties
This study deals with the fabrication of composite matrix from saw dust (SD) and recycled polyethylene terephthalate (PET) at different ratio (w/w) by flat-pressed method. The wood plastic composites (WPCs) were made with a thickness of 6 mm after mixing the saw dust and PET in a rotary type blender followed by flat press process. Physical i.e., density, moisture content (MC), water absorption ...
متن کاملMorphology and properties of microfibrillar composites based on recycled poly (ethylene terephthalate) and high density polyethylene
Microfibrillar composites (MFCs) from recycled high density polyethylene (R-HDPE)/recycled poly (ethylene terephthalate) (R-PET) (75/25 w/w) were made through reactive extrusion and post-extrusion strand stretching. The resultant MFCs could be processed at HDPE processing temperature. The compatibility between microfibers and R-HDPE matrix was improved through compatibilizers. Of the three comp...
متن کاملParticulate reinforced rotationally moulded polyethylene composites – Mixing methods and mechanical properties
In order to investigate the mechanical properties of particulate reinforced polyethylene when using rotational moulding process, different mathematical models are used to predict the tensile properties. A series of micro-sized particles at various volume fractions are used as fillers for Liner MediumDensity Polyethylene (LMDPE) to verify those theoretical models. A comparison with the experimen...
متن کاملPreliminary study of the physical and mechanical properties of soya stalk flour/high density polyethylene composite
The use of agriculture residues as filler in composites is increasing due to their strength, abundance and low cost. Soya stalks show promising renewable natural fiber. In polyethylene composites the physical and mechanical properties (flexural resistance, tensile, impacted absorbed energy, water uptake and thickness swelling) was examined at different composites. The results showed that, the m...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Results in Physics
سال: 2014
ISSN: 2211-3797
DOI: 10.1016/j.rinp.2014.05.003