The evaluation of monoethanolamine-based CO2 post-combustion capture process waste handling approaches considering the regulations in UAE
نویسندگان
چکیده
منابع مشابه
Detection of Degradation Products of Monoethanolamine- a Post-combustion Co2 Capture Solvent
Using solid phase extraction (SPE) combined with HPLCfluorescence/photodiode array (PDA) detection several low molecular-weight alkylamines (including ethylamine and propylamine) have been detected in the gas-phase, released during the oxidative/thermal degradation of monoethanolamine (MEA), an amine-based postcombustion CO2 capture solvent. In this study, a 30 wt% aqueous MEA solution was degr...
متن کاملMicrowave swing regeneration of aqueous monoethanolamine for post-combustion CO2 capture
Post-combustion carbon capture is a key component of the fight against global warming and climate change. Amine stripping is currently the leading post-combustion technology, and indeed is employed at the World’s first and only commercial scale carbon capture project applied to a power plant, at Boundary Dam, Canada. Normally, regeneration of the spent amine solution is achieved by stripping wi...
متن کاملBiomass Waste Carbon Materials as adsorbents for CO2 Capture under Post-Combustion Conditions
A series of porous carbon materials obtained from biomass waste have been synthesized, with different morphologies and structural properties, and evaluated as potential adsorbents for CO2 capture in post-combustion conditions. These carbon materials present CO2 adsorption capacities, at 25°C and 101.3 kPa, comparable to those obtained by other complex carbon or inorganic materials. Furthermore,...
متن کاملEnergy Savings Potential through Waste Heat Recovery from Flue Gas for Post Combustion Co2 Capture
Flue gas from a plant using fossil fuels contains CO2. Thus power/process plants using fossil fuels contribute to climate change if CO2 in flue gas is not captured. The process of CO2 capture from flue gas is called „postcombustion‟ CO2 capture. Existing plants may be retrofitted with this process to minimize CO2 emission. Amine solutions are mostly used for this process to scrub the flue gas. ...
متن کاملControl of a post-combustion CO2 capture plant during process start-up and load variations
Dynamic and flexible operation of a carbon capture plant is important as thermal power plants must be operated very flexibly to accommodate large shares of intermittent energy sources such as wind and solar energy. To facilitate such operation, dynamic models for simulation, optimization and control system design are crucial. In this paper, we present a dynamic mathematical model for the absorp...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energy Procedia
سال: 2013
ISSN: 1876-6102
DOI: 10.1016/j.egypro.2013.05.164